Bedienungsanleitung Harman Kardon AVR 4000 (Seite 43 von 58) (Englisch)

8518

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

PROGRAMMING THE REMOTE 43

Programming the Remote

Channel Control Punch-Through

The AVR 4000’s remote may be programmed to

operate so that the channel control function for

either the TV, cable or satellite receiver used in

your system may be used in conjunction with

one of the other devices controlled by the

remote. For example, while using and controlling

the VCR, you may wish to change channels on a

cable box or satellite receiver without having to

change the device selected by the AVR 4000 or

the remote. To program the remote for Channel

Control Punch-Through, follow these steps:

1. Press the Input Selector button

for the

device you wish to have the channel control asso-

ciated with and the Mute button

at the

same time until the red light illuminates under the

Input Selector

and the Program/SPL

Indicator

flashes amber.

2. Press the Volume Down button

.The

Program/SPL Indicator

will stop flashing

and stay amber.

3. Press and release the AVR

or Input

Selector button

for the device that will be

used to change the channels. The Program/SPL

Indicator

will blink green three times and

then go out to confirm the data entry.

Example: To control the channels using your TV

while the remote is set to control the VCR, first

press the VID 1/VCR Input Selector button

and the Mute button

at the same time.

Next, release them and press the Volume Down

button

, followed by the VID 2/TV Input

Selector button

NOTE: To remove the Channel Control Punch-

Through and return the remote to its original con-

figuration, repeat the steps shown in the example

above. However, press the VID 1/VCR Input

Selector in Steps 1 and 3.

Transport Control Punch-Through

The AVR 4000’s remote may be programmed to

operate so that the Transport Control Functions

x (Play, Stop, Fast Forward, Rewind, Pause and

Record) for a VCR, DVD or CD will operate in con-

junction with one of the other devices controlled

by the remote. For example, while using and con-

trolling the TV, you may wish to start or stop your

VCR or DVD without having to change the device

selected by the AVR 4000 or the remote. To pro-

gram the remote for Transport Control Punch-

Through, follow these steps:

1. Press the Input Selector

for the device

you wish to have the channel control associated

with and the Mute button

at the same time

until the red light illuminates, under the Input

Selector

and the Program/ SPL Indicator

flashes amber.

2. Press the Play button x.The Program/SPL

Indicator

will stop flashing and stay amber.

3. Press and release the AVR

or Input

Selector button

for the device that will be

used to change the channels. The Program/SPL

Indicator

will blink green three times and

then go out to confirm the data entry.

Example: To control the transport of a CD player

while the remote is set to control the TV, press the

VID 2/TV Input Selector button

and the

Mute button

at the same time. Next,

release them and press the Play button x,

followed by the CD Input Selector button

NOTE: To remove the Channel Control Punch-

Through and return the remote to its original con-

figuration, repeat the steps shown in the example

above. However, press the VID 2/TV Input

Selector in Steps 1 and 3.

NOTE: Before programming the remote for

Volume, Channel or Transport Punch-Through,

make certain that any programming needed for

the specific TV, CD, DVD, Cable or Satellite

Receivers has been completed.

Reassigning Device-Control

Selectors

Although any of the Input Selectors

is nor-

mally assigned to the category of product shown

on the remote, it is possible to reassign one of

these buttons to operate a second device of

another type. For example, if you have two VCRs

but no cable box receiver, you may program the

CBL/SAT

button to operate a second VCR.

Before following the normal programming steps

for either Three-Digit entry or Auto Search code

entry, you must first reassign the button with the

following steps:

1. Press the Input Selector

you wish to

reassign and the Mute button

at the same

time until the red light illuminates under the

Input Selector

and the Program/SPL

Indicator

flashes amber.

2. Press the Input or Video Device Selector

for the device, whose function you wish to

program into the reassigned button.

3. Enter the three-digit code for the specific

model you wish the reassigned button to oper-

ate.

4. Press the same Input Selector

pressed

in Step 1 once again to store the selection.The

red LED under the re-assigned Input Selector will

flash three times and then go out.

Example: To use the CBL/SAT button to operate

a second VCR, first press the CBL/SAT Input

Selector

and the Mute button

at the

same time until the red light glows under the

CBL/SAT

button. Press the VCR

button,

followed by the three-digit code for the specific

model you wish to control. Finally, press the

CBL/SAT

button again.

Resetting the Remote Memory

As you add components to your home-theater

system, occasionally you may wish to totally

reprogram the remote control without the confu-

sion of any commands, macros or ”Punch-

Through“ programming that you may have done.

To do this, it is possible to reset the remote to the

original factory defaults and command codes by

following these steps. Note, however, that once

the remote is reset, all commands or codes that

you have entered will be erased and will need to

be re-entered:

1. Press any of the Input Selector buttons

and the ”O“ button

at the same time until

the Program/SPL Indicator

begins to flash

amber.

2. Press the ”3“ button

three times.

3.The red LED under the Input Selector

will go out and the Program/SPL Indicator

will stop flashing and turn green.

4.The Program/SPL Indicator

will remain

green until the remote is reset. Note that this may

take a while, depending on how many commands

are in the memory and need to be erased.

5.When the Program/SPL Indicator

goes

out, the remote has been reset to the factory set-

tings.

Harman Kardon AVR 4000 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info