Bedienungsanleitung Harman Kardon AVR 5000 (Seite 21 von 58) (Englisch)

502627

21

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

SYSTEM CONFIGURATION 21

Input Setup

The first step in configuring the AVR5000 is to

select an input. This may be done by pressing

the front panel Input Source Selector

!

until the desired input’s name appears momen-

tarily in the Main Information Display

Y

,

and the green LED lights next to the input’s

name in the front panel Input Indicators



.

The input may also be selected by pressing the

appropriate Input Selector on the remote control

46

.

When using the full-OSD system to make the

setup adjustments, press the OSD button

L

once so that the MASTER MENU (Figure

1) appears. Note that the

› cursor will be next

to the IN/OUT SETUP line. Press the

Set button

F

to enter the menu and the

IN/OUT SETUP menu (Figure 2) will

appear on the screen. Press the

‹/› buttons

EU

until the desired input name appears in

the highlighted video, as well as being indicated

in the front panel Input Indicators



by the

green LED next to the desired input name. If the

input will use the standard left/right analog

inputs, no further adjustment is needed.

Figure 2

If you wish to associate one of the digital inputs

with the selected input source, press the

¤ but-

ton

D

on the remote while the IN/OUT

SETUP menu (Figure 2) is on the screen, and

note that the on-screen cursor will drop down to

the DIGITAL IN line. Press the

‹/› but-

tons

EU

until the name of the desired digi-

tal input name appears. To return to the

ANALOG input, press the buttons until the

word analog appears. When the correct input

appears, press the

¤ button

D

until the ›

cursor appears next to RETURN TO

MENU, and press the Set button

F

.

To change the digital input associated with the

input selected at any time using the discrete

function buttons and the semi-OSD system,

press the Digital Input Select button

Ú

G

on the front panel or the remote. Within five sec-

onds, make your input selection using the

Selector buttons on the front panel

5

or the

⁄/¤ buttons

D

on the remote until the

desired digital or analog input is shown in the

Main Information Display

Y

and in the

lower third of the video display connected to the

AVR5000. Then press the Set button

F

to

enter the new digital input assignment.

An exclusive Harman Kardon feature is the abili-

ty to switch front panel jacks from their normal

use as inputs to output connections so that

portable recording devices may easily be con-

nected. The front panel analog Video 4 Jacks

^

are normally set as an input for use with

camcorders, video games and other portable

audio/video products, but they may be switched

to an output for connection to portable

audio/video recorders. To temporarily switch

them to outputs, select the IN/OUT

SETUP menu. Press the

¤

button

D

until

the on-screen

›

cursor is pointing to the

VIDEO 4 line. Press the

›

button

U

so

that the word OUTis highlighted. Note that

the Input/Output Status Indicator

$

between the S and Composite video jacks will

turn red, indicating that the analog Video 4

jacks

^

are now record outputs.

On the AVR5000, the Coaxial 3 Digital Jack

%

is normally an input, but it may also be

switched to a digital output for use with CD-

R/RW decks, MD recorders or other digital audio

recorders. To change the jack to an output, press

the

⁄/¤ buttons

D

while the IN/OUT

SETUP menu is on the screen so that the

›

cursor is next to COAXIAL 3. Then press

the

‹/› buttons

E

/

U

so that the word

OUTis highlighted. Note that the Digital

Coax 3 Status Indicator

$

will turn red,

indicating that the jack is now a record output.

Note: A signal will be sent to this jack only

when the input selected for use by the AVR5000

is digital. Digital signals will be passed through

regardless of their format, and which digital

input (optical or coax) they are fed from.

However, analog signals are not converted to

digital, and the format of the signal (e.g., PCM,

Dolby Digital or DTS) may not be changed.

Selection of the Digital Coax 3 jack as an

output will remain effective as long as the

AVR 5000 is on. However, once the unit is

turned off, the jack will revert to its normal use

as an input when the unit is turned on again.

Surround Setup

Once the input setup has been completed, the

next step for that input is to set the surround

mode you wish to use with that input. Since sur-

round modes are a matter of personal taste, feel

free to select any mode you wish – you may

change it later.The Surround Mode chart on

page 28 may help you select the mode best suit-

ed to the input source selected. However, to

make it easier to establish the initial parameters

for the AVR5000, it is best to select Dolby Pro

Logic for most analog inputs and Dolby Digital

for inputs connected to digital sources. In the

case of inputs such as a CD Player,Tape Deck or

Tuner, you may wish to set the mode to Stereo, if

that is your preferred listening mode for stan-

dard stereo sources, where it is unlikely that sur-

round encoded material will be used.

Alternatively, the 5 Channel Stereo or

Logic 7

Music mode may also be a good choice for

stereo-only source material.

It is easiest to complete the surround setup

using the full-OSD on-screen menus. From the

main MASTER MENU menu (Figure 1),

press the

⁄/¤ button

D

until the › cursor is

next to the SURROUND SETUP menu.

Press the Set button

F

so that the

SURROUND SETUP menu (Figure 3 or 4)

is on the screen.

Figure 3

Figure 4

Since the factory default for all inputs is Stereo,

the words SURR OFFwill initially appear in

highlighted video (Figure 3) unless another sur-

round mode choice was made with the input

just selected. To change the surround mode

while the

› cursor is next to the surround line,

press the

‹/› buttons

EU

until the desired

surround mode’s name appears in the highlight-

ed video. As the modes are changed, a green

LED will also light next to the mode names in

the Surround Mode Indicators

˜

on the

front panel.

Note that the data lines next to the items in the

screen display will show either numbers or a

series of dashes, depending on whether or not

the specific parameter is adjustable. For example,

the Center Delay and Night Mode items are only

adjustable for Dolby Digital, and the Delay Time

is only adjusted for Dolby Digital and Dolby Pro

Logic. Note, also, that Dolby Digital and DTS will

only appear as choices (Figure 4) when a digital

input was previously selected.These settings for

Delay, Crossover Frequency and Night mode, that

are independent of any input selected, will be

described in the next chapter on page 23.

* SURROUND SETUP *

SURROUND: DOLBY

DIGITAL

CENTER DELAY: 0MS

SURR DELAY: 00MS

NIGHT: OFF MID MAX

RETURN TO MENU

* SURROUND SETUP *

SURROUND: SURR OFF

CENTER DELAY: MS

SURR DELAY: MS

NIGHT:   

RETURN TO MENU

* IN/OUT SETUP *

INPUT :VIDEO 1

DIGITAL IN:ANALOG

COAXIAL 3 :IN OUT

VIDEO 4 :IN OUT

RETURN TO MENU

System Configuration

1

nach dem einschalten wird das display dunkel bei harman stereoanlage
Eingereicht am 12-5-2022 06:51
Antworten Frage melden
Ich bin im Besitz der neuen UPC Box. Möchte den Ton über meinen Harmon Cardon Resiver AVR 5000 steuern. Leider kann ich den Resiver nicht auf Dgital umschalten, er überhüpft Ihn. Muss der Antennenanschluss auch digital sein?
Freundliche Grüsse

Stefan Scherrer

steven.scherrer@bluewin.ch Eingereicht am 9-2-2019 11:45
Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR 5000 wenn:

neue Frage gestellt werden
neue Handbücher vorhanden sind

Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.

Andere Handbücher von Harman Kardon AVR 5000

Harman Kardon AVR 5000 Bedienungsanleitung - Deutsch - 60 seiten

Harman Kardon AVR 5000 Bedienungsanleitung - Holländisch - 58 seiten

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.

Info