REMOTE CONTROL FUNCTIONS 11
REMOTE CONTROL FUNCTIONS
s Tuner Mode Button: Press this button to change
the tuner mode between manual and automatic. When
the button is pressed so that
AUTO appears at the
left side of the
Lower Display Line ¯, only stations
with acceptable signal quality will be tuned, and the
tuner will play FM stations in stereo, when available. In
the
AUTO mode, when the Tuning Up/Down
Buttons
9u are pressed, the unit will automati-
cally search for the next available station with good
signal strength. When this button is pressed so that
MANUAL appears on the left side of the Lower
Display Line
¯ each press of the Tuning
Up/Down Buttons
9u will move the frequency
up or down in single-step increments. When the FM
band is in use, pressing this button so that the
MANUAL mode is activated will enable you to tune
stations with weak signals by changing to monaural
reception. (See page 25 for more information.)
t Direct Button: When the tuner is in use, press
this button to start the sequence for direct entry of a
station’s frequency. After pressing the button simply
press the proper
Numeric Keys r to select a sta-
tion. (See page 25 for more information on the tuner.)
u Tuning Up/Down Buttons: When the tuner is in
use, these buttons will tune up or down through the
selected frequency band. If the
Tuner Mode Button
s& has been pressed so that the word AUTO
appears in the Lower Display Line ¯, pressing
either of the buttons will cause the tuner to seek the
next station with acceptable signal strength for quality
reception. When the word
MANUAL appears in the
Lower Display Line ¯, pressing these buttons will
tune stations in single-step increments. (See page 25
for more information.)
v Macro Buttons: Press these buttons to store or
recall a “Macro”, which is a preprogrammed sequence
of commands stored in the remote. (See page 28 for
more information on storing and recalling macros.)
w Dolby Mode Select Button: This button is used
to select from among the available Dolby Surround
processing modes. Each press of this button will select
one of the Dolby Pro Logic II modes or Dolby 3
Stereo. When a Dolby Digital-encoded source is in use,
the Dolby Digital mode may also be selected. (See
page 22 for the available Dolby surround mode
options.)
x DTS Digital Mode Select Button: Although
the AVR 130 will automatically select DTS processing
when the digital audio input source is a DTS data
stream, you may also press this button to select
DTS playback.
y Logic 7 Mode Select Button: Press this button
to seelct from among the available Logic 7 surround
modes. (See page 22 for available Logic 7 options.)
z Track Skip Up/Down Buttons: These buttons
have no direct function with the AVR 130, but when
used with a compatibly programmed CD or DVD
changer, they will change the track or chapter of the
disc currently being played in the changer.
` Transport Controls: These buttons do not have
any functions for the AVR 130, but they may be pro-
grammed for the forward/ reverse play operation of a
wide variety of CD or DVD players, and audio or video
cassette recorders. (See page 29 for more information
on programming the Transport Control Punch-Through
capability of the remote.)
Stereo Mode Select Button: Press this button
to select a stereo playback mode. When the button is
pressed so that
DSP SURR OFF appears in the
Lower Display Line ¯, the AVR will operate in a
bypass mode with true fully analog, two-channel
left/right stereo mode with no surround processing or
bass management as opposed to other modes where
digital processing is used. When the button is pressed
so that
SURROUND OFF appears in the Lower
Display Line
¯, you may enjoy a two-channel pres-
entation of the sound along with the benefits of bass
management. When the button is pressed so that
5
CH STEREO
appears, the stereo signal is routed
to all five speakers, if installed. (See page 22 for more
information on stereo playback modes.)
DTS Neo:6 Mode Select Button: Press this
button to select a DTS Neo:6 mode. These modes
take a two-channel stereo- or matrix surround-
encoded source and create a full five-channel sound
field. (See page 22 for the available DTS Neo:6
options.)
Disc Skip Button: This button has no direct
function for the AVR 130, but when used with a com-
patibly programmed CD or DVD changer, it will change
the disc currently being played in the changer. (See
page 28 for more information on using the remote
with other devices.)
Preset Up/Down Buttons: When the tuner is in
use, press these buttons to scroll through the stations
programmed into the AVR 130’s memory. When some
source devices, such as CD players, VCRs and cas-
sette decks, are selected using the device
Input
Selectors
e, these buttons may function as
Chapter Step or Track Advance.
Clear Button: Press this button to clear incorrect
entries when using the remote to directly enter a radio
station’s frequency.
Memory Button: Press this button to enter a radio
station into the AVR 130’s preset memory. First, tune the
desired station, and then press this button.When two
underline indicators flash at the right side of the
Upper
Display Line
˜, press the numeric keys for the pre-
set number between 01 and 30 that you wish to
assign to the station within five seconds. (See page 25
for more information.)
Delay Button: Press this button to begin
the process for setting the delay times used by the
AVR 130 when processing surround sound. After
pressing this button, the delay times are entered by
pressing the
Set Button o and then using the
⁄
/
¤
Buttons n to change the setting. Press
the
Set Button o again to complete the process.
(See page 19 for more information.)
Speaker Select Button: Press this button to
begin the process of configuring the AVR 130’s bass
management system for use with the type of speak-
ers used in your system. Once the button has been
pressed, use the
⁄
/
¤
Buttons n to select the
channel you wish to set up. Press the
Set Button
o and then select another channel to configure.
When all adjustments have been completed, press
the
Set Button o twice to exit the settings and
return to normal operation. (See page 16 for more
information.)
Spare Button: This button does not have any
function for the operation of the AVR 130, but it is
available for use when programmed with the code
from another remote. (See page 27 for information
on programming the remote with codes for other
devices.)
Volume Up/Down: Press these buttons to raise
or lower the system volume. (See page 29 for more
information on programming the Volume Punch-
Through capability of the remote, which allows you to
change the AVR 130’s volume while the remote is set
to control another device.)
TV/Video Selector: This button does not have a
direct function on the AVR 130, but when used with a
compatibly programmed VCR, DVD or satellite receiver
that has a “TV/Video” function, pressing this button will
switch between the output of the player or receiver
and the external video input to that player. Consult the
owner’s manual for your specific player or receiver for
the details of how it implements this function.
