502641

Harman Kardon AVR142 Seite 20

20
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
20
OPERATION
Operation
Memory Backup
This product is equipped with a memory backup
system that preserves tuner presets and system
configuration information if the unit is turned off
completely, accidentally unplugged or subjected to a
power outage. This memory will last for approximately
1 week, after which time all information must be
reentered.
Tuner Operation
The AVR’s tuner is capable of tuning AM, FM and FM
Stereo broadcast stations and receiving RDS data.
Stations may be tuned manually, or they may be
stored as favorite station presets and recalled from a 30
position memory.
Station Selection
Press the
1.
AM/FM Tuner Select button
+
on the
remote to select the tuner as an input. The tuner
may be selected from the front panel by either
pressing the Input Source Selector
until
the tuner is active or by pressing the Tuner Band
Selector
at any time.
Press the
2. AM/FM Tuner Select button
+
or Tuner Band Selector
again to switch
between AM and FM so that the desired frequency
band is selected.
Press the
3. Tuner Mode button
"
on the remote
or hold the Band Selector
on the front
panel pressed for 3 seconds to select manual or
automatic tuning.
When the button is pressed so that

appears
in the Main Information Display
each press
of the Tuning Selectors
will put the tuner
in a scan mode that seeks the next higher or lower
frequency station with acceptable signal strength. An
ee
indication will momentarily
appear when the station stops at a stereo FM station,
and an
e
indication will momentarily
appear when an AM or monaural FM station is tuned.
Press the Tuning buttons again to scan to the next
receivable station.
When the button is pressed so that

appears in the Main Information Display
each tap of the Selector will increase or decrease the
frequency by one increment. When the tuner receives
a strong enough signal for adequate reception,
e
will appear in the Main
Information Display
.
Stations may also be tuned directly by pressing 4.
the Direct button
!
, and then pressing the
Numeric Keys
#
that correspond to the
station’s frequency. The desired station will
automatically be tuned after the latest number
is entered. If you press an incorrect button while
entering a direct frequency, press the Clear
button
to start over.
NOTE
: When the FM reception of a stereo station is
weak, audio quality will be increased by switching
to Mono mode by pressing the Tuner Mode button
"
on the remote or holding the Band Selector
on the front panel so that

appears
momentarily in the Main Information Display
and then goes out.
Preset Tuning
Using the remote, up to 30 stations may be stored in
the AVR’s memory for easy recall using the front panel
controls or the remote.
To enter a station into the memory, first tune the
station using the steps outlined above. Then:
Press the 1. Memory button
on the remote.
Note that two underscore lines will appear in the
Main Information Display
.
Within five seconds, press the
2. Numeric Keys
#
corresponding to the location where you wish
to store this station’s frequency. Once entered,
the preset number will appear in the Main
Information Display
.
Repeat the process after tuning any additional
3.
stations to be preset.
Recalling Preset Stations
To manually select a station previously entered in
t
the preset memory, press the Numeric Keys
#
that correspond to the desired station’s memory
location.
To manually tune through the list of stored preset t
stations one by one, press the Preset Stations
Selector buttons
on the front panel or
remote.
RDS Operation
The AVR is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station program
type, text messages about the station or specifics of a
musical selection, and the correct time.
RDS Tuning
When an FM station is tuned in and it contains RDS
data, the AVR will automatically display the station’s
call sign or other program service in the Main
Information Display
.
RDS Display Options
The RDS system is capable of transmitting a wide
variety of information in addition to the initial station
call sign that appears when a station is first tuned.
In normal RDS operation the display will indicate
the station name, broadcast network or call letters.
Pressing the RDS button
enables you to
cycle through the various data types in the following
sequence:
The station’s call letters (with some private stations t
other information too).
The station’s frequency (
t

).
The Program Type (
t

).
A “text” message (Radiotext,
t

) containing
special information from the broadcast station.
Note that this message may scroll across the
display to permit messages longer than the eight
positions in the display. Depending on signal
quality, it may take up to 30 seconds for the text
message to appear; in that time, the word

will flash in the Information Display when RT is
selected.
The current time of day (
t

). Note that it may
take up to two minutes for the time to appear.
In that time the word

will flash in
the information display when CT is selected.
Please note that the accuracy of the time data is
dependent on the radio station, not the AVR.
Some RDS stations may not include some of these
additional features. If the data required for the
selected mode is not being transmitted, the Main
Information Display
will show a
e 
,
e
or
e
message after the
individual time out.
In any FM mode the RDS function requires a strong
enough signal for proper operation.
… 20 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR142 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Harman Kardon AVR142

Harman Kardon AVR142 Bedienungsanleitung - Deutsch - 24 seiten

Harman Kardon AVR142 Bedienungsanleitung - Holländisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info