Bedienungsanleitung Harman Kardon AVR147 (Seite 10 von 68) (Englisch)

502556

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

REAR-PANEL CONNECTIONS

AM and FM Antenna Terminals: Connect the included AM and

FM antennas to their respective terminals for radio reception.

XM Antenna Jack: Plug in an XM antenna module here. The XM

antenna module is purchased separately, and should specify that it is for

home use with an XM Ready

product. You will need to subscribe to the

XM service, which is available separately, and activate the service for

your antenna module. (XM service is not available in Alaska and Hawaii.)

Front, Center and Surround Speaker Outputs: Use two-

conductor speaker wire to connect each set of terminals to the correct

speaker. Remember to observe the correct polarity (positive and negative

connections). Always connect the positive lead to the colored terminal

on the receiver and the red terminal on the speaker. Connect the negative

lead to the black terminal on both the receiver and the speaker. See the

Connections section for more information on connecting your speakers.

Subwoofer Output: If you have a powered subwoofer with a

line-level input, connect it to this jack.

Video 1, Video 2 and DVD Audio/Video Inputs: These jacks may

be used to connect your video-capable source components (e.g., VCR,

DVD player, cable TV box) to the receiver. Use only one type of video con-

nection for each source. See the Connections section for more information

on audio and video connection options for each source component.

Video 1 Audio/Video Outputs: These jacks may be used to

connect your VCR or another recorder.

Composite and S-Video Monitor Outputs: If some of your

sources use composite or S-video connections, connect one or both of

these monitor outputs to the corresponding inputs on your television

or video display to view them.

HDMI Inputs and Output: HDMI (High-Definition Multimedia

Interface) is a newer type of connection for transmitting digital audio and

video signals between devices. Although the AVR 147 is not capable of

processing HDMI signals, if your video display is HDMI-capable, you may

connect up to two HDMI sources here, and then connect the HDMI out-

put to your video display for improved video performance. It is recom-

mended that you disable the HDMI audio function of your video display,

and make a separate digital audio connection from the source device to

one of the AVR’s coaxial or optical digital audio inputs to benefit from

the AVR 147’s multichannel audio processing.

The AVR 147 is Simplay HD-verified for compatibility via the HDMI

connection with other Simplay HD-verified products.

NOTE: The AVR 147 will not convert other types of video to

HDMI, and you will not be able to view the on-screen displays

using the HDMI connection.

CD and Tape Audio Inputs: These jacks may be used to connect

audio-only source components (e.g., CD player, tape deck). Do not

connect a turntable to these jacks unless you are using it with a

phono preamp.

Tape Outputs: These jacks may be used to connect a CDR or

another audio-only recorder.

Coaxial and Optical Digital Audio Inputs: If your source has

a compatible digital audio output, connect it to one of these jacks for

improved audio performance. Use only one type of digital audio connection

for each source.

Coaxial and Optical Digital Audio Outputs: If a source is also

an audio recorder, you may connect a compatible digital audio output to

the recorder’s input for improved recording quality.

The Bridge/DMP Input: Connect the optional Harman Kardon

to this input for use with your iPod (not included). Make

sure the receiver is turned off (in Standby mode) when connecting

The Bridge.

6-Channel Inputs: Connect the multichannel analog audio outputs

of a DVD-Audio, SACD

™

, Blu-ray Disc

™

or HD-DVD

™

player (or any

other external decoder) to these jacks to enjoy these proprietary formats.

Component Video Inputs: If both your video source (e.g., DVD

player or HDTV tuner) and your television or video display have analog

component video (Y/Pb/Pr) capability, then you may connect the

component video outputs of your source to one of the two component

video inputs. Do not make any other video connections to that source.

Component Video Monitor Outputs: If you are using either

of the Component Video Inputs and your television or video display is

component-video-capable, you may connect these jacks to the corre-

sponding inputs on your video display. You will also need to connect the

composite and/or S-video monitor outputs to your video display if some

of your sources use those types of video connections, and to view the

AVR 147’s on-screen displays.

RS-232 Serial Port: This specialized connector may be used with

your personal computer in case Harman Kardon offers a software

upgrade for the receiver at some time in the future.

RS-232 Mode: Leave this switch popped out in the Operate position

unless the AVR 147 is being upgraded.

RS-232 Reset: This switch is only used during a software upgrade.

A standard processor reset is performed by pressing and holding the

front-panel Tone button.

Switched AC Accessory Outlet: You may plug the AC power

cord of one source device into this outlet, and it will turn on whenever

you turn on the receiver. Do not use a source that consumes more than

50 watts of power.

AC Power Cord: After you have made all other connections, plug

the AC power cord into an unswitched outlet.

The

Bridge

AVR147-OM.qxd 5/2/07 3:48 PM Page 10

Harman Kardon AVR147 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info