502590
46
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
46
TROUBLESHOOTING GUIDE
PROCESSOR RESET
If the unit behaves erratically after a power surge, first turn off the Main
Power Switch and unplug the AC power cord for at least 3 minutes. Plug the
cord back in and turn the receiver on. If this doesn’t help, reset the AVR.
NOTE
: A system reset erases all user configurations, including video
resolution, speaker and level settings, and tuner presets. After a reset,
reenter all of these settings from your notes in the appendix worksheets.
To reset the AVR 160, place it in Standby mode (press the front-panel
Standby/On Switch so that the Power Indicator turns amber). Then press the
front-panel Surr. Mode Button until the RESET message appears.
If the receiver does not function correctly after a processor reset, contact an
authorized Harman Kardon service center for assistance. Authorized service
centers may be located by visiting the Web site at www.harmankardon.com.
MEMORY
If the AVR 160 is unplugged or experiences a power outage, it will retain user
settings for up to two weeks.
SYMPTOM CAUSE SOLUTION
Unit does not function when Main
Power Switch is turned on
No AC Power Make certain AC power cord is plugged into a live outlet
Check whether outlet is switch-controlled
Display lights, but no sound or
picture
Intermittent input connections Secure all input and speaker connections
Mute is on Press Mute Button
Volume control is down Turn up volume control
No sound from any speaker;
PROTECT message appears on
front panel
Amplifier is in protection mode due to
possible short
Check speaker wires for shorts at receiver and speaker ends
Amplifier is in protection mode due to
internal problems
Contact your local Harman Kardon service center
No sound from surround or center
speakers
Incorrect surround mode Select a mode other than Stereo
Input is monaural There is no surround information from mono sources
Incorrect configuration Check speaker configuration
Stereo or Mono program material The surround decoder may not create center- or rear-channel
information from nonencoded programs
Unit does not respond to remote
commands
Weak batteries in remote Change remote batteries
Wrong device selected Press the AVR Settings Button
Remote sensor is obscured Make certain front-panel sensor is in line of sight of remote or connect
an optional remote sensor
Intermittent buzzing in tuner Local interference Move unit or antenna away from computers, fluorescent lights,
motors or other electrical appliances
Additional information on troubleshooting possible problems with your AVR 160, or installation-related issues, may be found in the list
of “Frequently Asked Questions”, which is located in the Product Support section at www.harmankardon.com.
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR160 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Harman Kardon AVR160

Harman Kardon AVR160 Bedienungsanleitung - Deutsch - 48 seiten

Harman Kardon AVR160 Bedienungsanleitung - Holländisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info