REMOTE CONTROL FUNCTIONS 13
weak will change to monaural reception. (See page
28 for more information.)
t Direct Button: When the tuner is in use, press
this button to start the sequence for direct entry of a
station’s frequency. After pressing the button simply
press the proper
Numeric Keys r to select a sta-
tion. (See page 28 for more information on the tuner.)
u Tuning Up/Down: When the tuner is in use, these
buttons will tune up or down through the selected fre-
quency band. If the
Tuner Mode Button s@ has
been pressed so that the
Auto Indicator R is illumi-
nated, pressing either of the buttons will cause the tuner
to seek the next station with acceptable signal strength
for quality reception. When the
Auto Indicator R is
NOT illuminated, pressing these buttons will tune sta-
tions in single-step increments. (See page 28 for more
information.)
v OSD Button: Press this button to activate the On
Screen Display (OSD) system used to set up or adjust
the AVR 225’s parameters.
w Macro Buttons: Press these buttons to store or
recall a “Macro”, which is a preprogrammed sequence
of commands stored in the remote. (See page 33 for
more information on storing and recalling macros.)
x Transport Controls: These buttons do not have
any functions with the AVR 225 but they may be pro-
grammed for the forward/reverse play operation of a
wide variety of CD or DVD players, and audio or video
cassette recorders. (See page 34 for more information
on programming the Transport Control Punch-Through
capability of the remote.)
y Skip Up/Down Buttons: These buttons have no
direct function with the AVR 225, but when used with
a compatibly programmed CD or DVD changer they
will change the track or chapter of the disc currently
being played in the changer.
z Disc Skip Button: This button has no direct
function for the AVR 225, but when used with a com-
patibly programmed CD or DVD changer, it will change
the disc currently being played in the changer. (See
page 33 for more information on using the remote
with other devices.)
` Preset Up/Down: When the tuner is in use,
press these buttons to scroll through the stations
programmed into the AVR 225’s memory. When
some source devices, such as CD players, VCRs
and cassette decks, are selected using the device
Input Selectors e, these buttons may function
as Chapter Step or Track Advance.
Clear Button: Press this button to clear incorrect
entries when using the remote to directly enter a radio
station’s frequency.
Memory Button: Press this button to enter a
radio station into the AVR 225’s preset memory. Once
the
Memory Indicator O flashes, you have five
seconds to enter a preset memory location using
the
Numeric Keys r. (See page 28 for more
information.)
Delay/Prev Ch.: Press this button to begin
the process for setting the delay times used by the
AVR 225 when processing surround sound. After
pressing this button, the delay times are entered by
pressing the
Set Button o and then using the
⁄
/
¤
Buttons mq to change the setting. Press
the
Set Button o again to complete the process.
(See page 18 for more information.)
›
Button: Press this button to change a setting
or selection when configuring many of the AVR 225’s
settings.
Speaker Select: Press this button to begin the
process of configuring the AVR 225’s bass manage-
ment system for use with the type of speakers used
in your system. Once the button has been pressed,
use the
⁄
/
¤
Buttons mq to select the chan-
nel you wish to set up. Press the
Set Button o
and then select another channel to configure. When
all adjustments have been completed, press the
Set Button o twice to exit the settings and
return to normal operation. (See page 20 for more
information.)
Spare Button: This button does not have any
function for the operation of the AVR 225, but it is
available for use when programmed with the code
from another remote. (See page 32 for information
on programming the remote with codes for other
devices.)
Volume Up/Down: Press these buttons to raise
or lower the system volume. See page 34 for more
information on programming the Volume Punch-
Through capability of the remote, which allows you to
change the AVR 225’s volume while the remote is set
to control another device.
TV/Video Selector: This button does not have a
direct function on the AVR 225, but when used with a
compatibly programmed VCR, DVD or satellite receiver
that has a “TV/Video” function, pressing this button will
switch between the output of the player or receiver
and the external video input to that player. Consult the
owner’s manual for your specific player or receiver for
the details of how it implements this function.
SPL Button: This button activates the AVR 225’s
EzSet function to quickly and accurately calibrate the
AVR 225’s output levels. Press and hold the button for
three seconds and then release it. The Test Tone will
begin circulating, and the Program/SPL Indicator c
will change colors. During this sequence, EzSet will
automatically adjust the output levels for all channels
until they have equal output levels, as shown by the
Program/SPL Indicator c lighting green for each
channel. (See page 21 for more information on EzSet.)
6-Channel Direct Input: Press this button to
select the component connected to the
6-Channel
Direct Inputs
i as the source.
Mute: Press this button to momentarily silence
the AVR 225 or TV set being controlled, depending on
which device has been selected. When the AVR 225
is muted, press this button or use the
Volume Control
Ó to return to the previous volume level.
When the AVR 225 remote is being programmed to
operate another device, or when a macro command is
being programmed, this button is pressed with the
Input Selector Button e to begin the program-
ming process. (See page 33 for more information.)
EzSet Sensor Microphone: The sensor micro-
phone for the EzSet microphone is behind these slots.
When using the remote to calibrate speaker output
levels using EzSet, be sure that you do not hold the
remote in a way that covers these slots. (See page 21
for more information on using EzSet.)
