Bedienungsanleitung Harman Kardon AVR247 (Seite 8 von 76) (Englisch)

502596

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Main Power Switch: This mechanical switch turns the power supply

on or off. It is usually left pressed in (On position), and cannot be turned

on using the remote control.

Standby/On Switch: This electrical switch turns the receiver on

for playback, or leaves it in Standby mode for quick turn-on using this

switch or the remote control.

Power Indicator: This LED has three possible modes. When main

power is turned off, the LED is dark and the receiver won’t respond to

any button presses. When main power is turned on, but before the

Standby/On Switch is used, the LED turns amber to indicate that the

receiver is in Standby mode and ready to be turned on. When the

receiver is turned on, the LED turns blue.

Source Select: Press this button to select a source device, which

is a component where a playback signal originates, e.g., DVD, CD,

cable TV, satellite or HDTV tuner.

Source Indicators: The name of the current source input lights up.

The indicated input changes each time the Source Select button is

pressed.

Volume Knob: Turn this knob to raise or lower the volume, which will

be shown in decibels (dB) in the Message Display.

Message Display: Various messages appear in this two-line display

in response to commands and changes in the incoming signal. When

the on-screen display menu system (OSD) is in use, the message OSD

ON will appear to remind you to check the video display.

Tuner Band: Press this button to select the tuner as the source, to

switch between the AM and FM bands, or to select XM satellite radio.

Tuning: Press either side of this button to tune a radio station or

XM channel.

Tuning Mode: This button toggles between manual (one frequency

step at a time) and automatic (seeks frequencies with acceptable signal

strength) tuning mode. It also toggles between stereo and mono modes

when an FM station is tuned.

When XM Radio is in use, pressing this button repeatedly displays the

channel name, category, artist and track title in the lower line of the

Message Display. For traffic-and-weather channels, this button displays

the city, channel name, local weather and local temperature.

Preset Stations: Press this button to select a preset radio station.

Headphone Jack/EzSet/EQ Microphone Input: Plug a 1/4"

headphone plug into this jack for private listening.

This jack is also used to connect the supplied microphone before begin-

ning the EzSet/EQ procedure described in the Initial Setup section. To

begin EzSet/EQ, plug the supplied microphone into this jack, place the

microphone at the listening position, and follow the directions given in

the Speaker Setup-Auto Configuration on-screen menu.

Surround Mode: Press this button to select a surround sound (e.g.,

multichannel) mode group. Choose from the Dolby modes, DTS modes,

Logic 7 modes, DSP modes or Stereo modes.

Surround Select: After you have selected the desired surround

mode group, press this button to select a specific mode.

Surround Mode Indicators: One or more of these icons may light

up as you select different surround modes. The Message Display also

indicates the surround mode.

Analog Audio, Video and Digital Audio Inputs: Connect a

source component that will only be used temporarily, such as a camera

or game console, to these jacks. Use only one type of audio and one

type of video connection.

Speaker/Channel Input Indicators: The box icons indicate

which speaker positions you have configured, and the size (frequency

range) of each speaker. When a digital audio input is used, letters will

light inside the boxes to indicate which channels are present in the

incoming signal.

Navigation: These buttons are used together with the following five

buttons to make selections.

Tone Mode: Press this button to access the tone controls (bass and

treble). Use the

‹

›

Navigation Buttons to make your selections.

Speaker: Press this button to configure speaker sizes, that is, the

low-frequency-range capability of each speaker.

Channel Level Adjust: Press this button to set the output level for

each channel so that all speakers sound equally loud at the listening

position.

Digital Input Select: Press this button to select the specific digital

audio input (or analog audio input) you used for the current source.

Delay: Press this button to set delay times that compensate for

placing the speakers at different distances from the listening position.

Remote IR Sensor: This sensor receives infrared (IR) commands

from the remote control. It is important to ensure that it is not blocked.

If covering the sensor is unavoidable, such as when the AVR 247 is

placed inside a cabinet, you may use an optional Harman Kardon

HE 1000, or other infrared receiver, connecting it to the Remote IR

Input on the AVR 247’s rear panel. Alternatively, connect the Remote IR

Output of another compatible component to the AVR 247’s Remote

IR Input. Point the remote at the other device’s remote sensor, and the

command will be transmitted to the AVR 247. An external IR “blaster”

may also be used, positioned to point at this area.

FRONT-PANEL CONTROLS

AVR247om.qxd 7/10/07 1:05 PM Page 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR247 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info