Bedienungsanleitung Harman Kardon AVR247 (Seite 19 von 76) (Englisch)

502596

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Analog Audio

Analog connections require two cables, one for the left channel (white)

and one for the right channel (red). These two cables are often attached

to each other for most of their length. See Figure 7.

Most sources that have digital audio jacks also have analog audio jacks,

although some older types of sources, such as tape decks, have only

analog jacks. For sources that are capable of both digital and analog

audio, you may wish to make both connections.

The analog audio connection is strongly recommended if you intend to

use the source with the multiroom system. It’s required if you will be

using the multiroom preamp outputs with an external amplifier to power

your remote speakers, as the AVR 247’s multiroom system is not capa-

ble of converting the digital signal to analog format. It’s suggested that

you also use the analog audio connections when using the surround

back/multiroom speaker outputs, in case another two-channel digital

audio source is in use in the main listening area. The AVR 247 is only

capable of processing one PCM source at a time.

If you wish to record materials from DVDs or other copy-protected

sources, you may only do so using analog connections. Remember to

comply with all copyright laws, if you choose to make a copy for your

own personal use.

Figure 7 – Analog Audio

Multichannel analog connections are used with some high-definition

sources where the copy-protected digital content is decoded inside the

source. These types of connections are usually used with DVD-Audio,

SACD, Blu-ray Disc, HD-DVD and other multichannel players. See

Figure 8. However, the multichannel analog audio connection is not

required for DVD-Audio players compliant with HDMI version 1.1 or

better, or HD-DVD and Blu-ray Disc players that decode the digital audio

internally and output linear PCM signals in digital format. Consult the

owner’s guide for your disc player for more information.

Figure 8 – Multichannel Analog Audio

Harman Kardon receivers also include a proprietary, dedicated audio

connection called “The Bridge/DMP”. If you own an iPod with a dock

connector, you may purchase The Bridge separately and connect it to

The Bridge/DMP port on the receiver. See Figure 9. Dock your iPod

(not included) in The Bridge, and you may enjoy your audio and video

materials through your high-performance audio/video system. You may

even use the AVR 247 remote to control the iPod, with navigation

messages displayed on the front panel and on a video display connected

to the AVR. The Bridge outputs analog audio to the AVR 247, and it is

available to the multiroom system.

Figure 9 – The Bridge

Video Connections

Although some sources produce an audio signal only (e.g., CD player,

tape deck), many sources output both audio and video signals (e.g.,

DVD player, cable television box, HDTV tuner, satellite box, VCR, DVR).

In addition to the audio connection, connect one type of video connec-

tion for each source (never more than one at the same time for any

source).

Digital Video

If you have already connected a source device to one of the HDMI

inputs as explained in the Digital Audio Connections section, then you

have automatically made a video connection at the same time, as the

HDMI signal includes both digital audio and video components.

If the source device is not capable of transmitting its digital audio signal

through the HDMI connection, then use one of the coaxial or optical

digital audio inputs for the source.

If a multichannel analog audio connection is required for certain lossless

formats (e.g., DVD-Audio, SACD, HD-DVD or Blu-ray Disc), you may

make both audio connections, but you must also make an analog video

connection. To listen to the multichannel disc, first select the analog video

source input, then select the 6-/8-channel analog audio inputs, and the

AVR will retain the last video source you selected other than HDMI.

The AVR 247 is Simplay HD-verified for compatibility via the HDMI

connection with other Simplay HD-verified products.

Figure 4 (repeated) – HDMI Connection

Analog Video

There are three types of analog video connections: composite video,

S-video and component video.

Composite video is the basic connection most commonly available. The

jack is usually color-coded yellow, and looks like an analog audio jack,

although it is important never to confuse the two. Do not plug a composite

video cable into an analog or coaxial digital audio jack, or vice versa.

Both the chrominance (color) and luminance (intensity) components of

the video signal are transmitted using a single cable. See Figure 10.

Figure 10 – Composite Video

S-video, or “separate” video, transmits the chrominance and luminance

components using separate wires contained within a single cable. The

Composite

video cable

Multichannel

analog audio

cable (RCA)

Front Surround Center

Subwoofer

Analog audio

cable (RCA)

CONNECTIONS

AVR247om.qxd 7/10/07 1:05 PM Page 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR247 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info