Bedienungsanleitung Harman Kardon AVR254 (Seite 41 von 76) (Englisch)

502597

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

OPERATION

2. Only PCM digital audio signals are available for recording.

Proprietary formats such as Dolby Digital and DTS may not

be recorded using the digital audio connections, although

if the source is connected to the AVR using analog audio

connections, an analog recording may be made.

3. HDMI and component video sources are not available for

recording.

4. Please make certain that you are aware of any copyright

restrictions on any material you record. Unauthorized duplica-

tion of copyrighted materials is prohibited by federal law.

Stereo Jack Input

Enjoy the full power and resolution of your Harman Kardon system,

including a variety of analog surround modes, while listening to content

stored on your portable device.

The Stereo Jack is provided on the AVR’s rear panel for convenient

connection of portable players, such as CD players and the iPod ( iPod

and cable not included). Purchase a stereo cable with a 1/8" plug on

at least one end for connection to the Stereo Jack. Plug the other

end of the cable into the portable device’s headphone output, and

operate the device using its own controls. You may also use a cable

with separate left and right audio plugs at one end for connection to

any component equipped with analog audio outputs.

You may assign the Stereo Jack and any analog video input to the

AUX source, which uses the front-panel inputs by default.

Selecting a Surround Mode

Surround mode selection can be as simple or sophisticated as your

individual system and tastes. Feel free to experiment with the many

available surround modes on the AVR 254, and you may find a few that

become your favorites for certain sources or program types. Although

more detailed information on surround modes may be found in the

Advanced Functions section, it is easy to select any of the modes

available at a given time:

To select a surround mode, press the Surround Modes Button

(front panel or remote) repeatedly until the desired option appears:

SURR: AUTO SELECT, SURR: VIRTUAL, SURR: STEREO, SURR: MOVIE,

SURR: MUSIC or SURR: GAME. The option will be displayed in the

Lower Line of the Message Display, and the Surround Modes menu

will appear on screen (see Figure 57).

Figure 57 – Surround Modes menu

Auto Select: With this surround mode option selected, the AVR’s sophis-

ticated circuitry will analyze the incoming audio signal, identify its type

and select an appropriate surround mode. For digital programs, such as

movies recorded with a Dolby Digital soundtrack, the AVR will automati-

cally use the native surround format. For two-channel analog and PCM

programs, the AVR is programmed to default to Logic 7 Movie mode.

Virtual Surround: When only two main speakers are present in the

system, Dolby Virtual Surround may be used to create an enhanced

soundfield that virtualizes the missing speakers. Select between Wide

and Reference modes, depending on your preferences.

Stereo: When two-channel playback is desired, select the number of

speakers used for playback:

• 2 CH STEREO for playback through only two speakers. As described

on page 42, you may select Analog Bypass mode for a pure analog

signal when analog audio inputs are in use. Simply set the Tone

Control setting in the Audio Effects submenu to Off, and the AVR

does the rest.

• 5 CH STEREO for playing the left-channel signal through the front

and surround left speakers, the right-channel signal through the right

speakers and a summed mono signal through the center speaker

• 7 CH STEREO follows the same scheme as 5 CH STEREO, but adds

the surround back speakers to the mix. This mode is only available

when the surround back speakers are present and have not been

reassigned to multizone operation. See the Initial Setup section for

more information.

Movie: Select an analog surround mode for movie playback: Logic 7

Movie, DTS Neo:6 Cinema or Dolby Pro Logic II (IIx when seven main

speakers are present). The desired mode may also be selected when

a compatible digital surround mode is received.

Music: Select an analog surround mode for music playback: Logic 7

Music, DTS Neo:6 Music or Dolby Pro Logic II (IIx when seven main

speakers are present). The Dolby Pro Logic II/IIx Music mode allows

access to a submenu with some additional settings. See the Advanced

Functions section for more information.

Video Game: Select an analog surround mode for game playback:

Logic 7 Game, or Dolby Pro Logic II (IIx when seven main speakers

are present).

After you have made your selection, press the Back/Exit Button until

the screen is cleared.

See the Advanced Functions section for more information on

surround modes.

AVR254om.qxd 3/28/08 12:46 PM Page 41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR254 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info