Bedienungsanleitung Harman Kardon AVR255 (Seite 17 von 58) (Englisch)

502550

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Installation and Connections

9. Connections to a subwoofer are normally

made via a line level audio connection from the

Subwoofer Output

to the line-level input

of a subwoofer with a built-in amplifier. When a

passive subwoofer is used, the connection first

goes to a power amplifier, which will be con-

nected to one or more subwoofer speakers. If

ou are using a powered subwoofer that does

not have line-level input connections, follow the

instructions furnished with the speaker for con-

nection information.

10. If an external multi-channel audio source

with 5.1 outputs such as an external digital

rocessor/decoder, DVD-Audio, SACD, Blu-ray or

HD-DVD player is used, connect the outputs of

that device to the 8-Channel Direct Inputs

or, more easy, use the HDMI connection between

such a device and the AVR, or both.

Video Equipment Connections

Video equipment is connected in the same

manner as audio components.Again, the use of

high-quality interconnect cables is recommended

to preserve signal quality.To ensure best video

performance S-Video sources should be

connected to the AVR only with their S-Video

In/Outputs, not with their composite video

connectors too.

If you have already connected a source device to

one of the HDMI inputs as explained in the

Audio Equipment section, then you have auto-

matically made a video connection at the same

time, as the HDMI signal includes both digital

audio and video components.

If your video display or source device is not

HDMI-capable, you will need to use one of the

analog video connections (composite, S- or com-

ponent video), if available, as described below.

If the source device is not capable of transmit-

ting its digital audio signal through the HDMI

connection, then use one of the coaxial or

optical digital audio inputs for the source.

If a multichannel analog audio connection is

required for certain lossless formats (e.g. DVD-

Audio, SACD, HD-DVD or Blu-ray Disc), you may

make both connections. To listen to the multi-

channel disc, first select the HDMI source input,

then select the 6-/8-channel analog audio

inputs, and the AVR will retain the last video

ource you selected.

1. Connect a VCR’s audio and video Play/Out

jacks to the Video 2 and Analog 4 In jacks

on the rear panel. The Audio and Video

Record/In jacks on the VCR should be connected

to the Video 2 and Analog 4 Out jacks

n the AVR.

2. Connect the digital audio outputs of a CD,

MD or DVD player, satellite receiver, cable box or

HDTV converter to the appropriate Optical or

Coaxial Digital Inputs

RN&*

NOTE: When connecting a device such as a digi-

tal cable box or other set-top tuner product with

a digital audio output, we recommend that you

connect both the digital and analog outputs of

the product to your AVR. The audio input polling

feature of the AVR will then be able to make cer-

tain that you have a constant audio feed, since it

will automatically switch the audio input to the

analog jacks if the digital feed is interrupted or

not available for a particular channel.

3. Connect the Composite and S-Video (if S-

Video device is in use) Monitor Output

jacks on the receiver to the composite and S-

Video input of your television monitor or video

projector.

4. If your DVD player and monitor both have

component video connections, connect the com-

ponent outputs of the DVD player to the Video

1 Component Video Inputs

. Note that

even when component video connections are

used the audio connections must still be made

to either one of the analog audio inputs or any

of the Optical or Coaxial Digital Input jacks

5. If another component video device is avail-

able, connect it to the Video 2 or Video 3

Component Video Input jacks

. The

audio connections for this device should be

made to either one of the audio input jacks or

any of the Optical or Coaxial Digital Input

jacks

6. If the component video inputs are used,

connect the Component Video Output

the component video inputs of your TV, projector

or display device.

7. If you have a camcorder, video game or other

audio/video device that is connected to the AVR

on a temporary, rather than permanent basis,

connect the audio, video and digital audio out-

puts of that device to the Front Panel Inputs

&*(

ENGLISH

INSTALLATION AND CONNECTIONS 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR255 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR255

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info