Bedienungsanleitung Harman Kardon AVR255 (Seite 38 von 58) (Englisch)

502550

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Color: This control adjusts the hue of the colors

in the picture, and may be set between 0 and

100. Select a setting in which people and

objects on screen look natural. There is no

“recommended” setting, and no harm in

experimenting.

Sharpness: You may adjust the Sharpness

setting from 0 to 100. We recommend leaving

this setting as low as possible, as contrary to

what you might expect, a less sharp image can

appear clearer on screen. In addition, increasing

he Sharpness requires additional video

processing, which may lead to loss of sync with

the audio or visual artifacts. However, there is no

harm in experimenting with this setting.

Audio Effects

Depending on the specific characteristics of your

listening room, you may wish to adjust some of

the audio settings, such as tone controls, to

improve performance. Access these settings from

the Audio Effects menu. Press the Audio Effects

Button on the front panel or remote, and the

screen shown in Figure 21 will appear. The menu

may also be accessed from the Setup Source

menu by pressing the Info Settings Button and

selecting the Audio Effects line.

NOTE: The settings in the Audio Effects menu

affect each source independently.

Figure 21 – Audio Effects Menu

Tone Control: This setting determines whether

the treble and bass controls are active. When it’s

off, the tone controls are “flat”, with no

changes. When it’s on, the bass and treble

frequencies are boosted or cut depending upon

the tone-control settings. When an analog audio

source is in use and the 2-Channel Stereo

surround mode is selected, setting the Tone

Control to “Off” places the unit in analog

bypass mode, with no digital processing of the

analog signal.

Treble: Boost or cut the high frequencies by up

to 10dB by using the M/N Buttons to change

the temperature bar setting. The default setting

is 0dB, at the center of the temperature bar.

Bass: Boost or cut the low frequencies by up to

10dB by using the M/N Buttons to change the

temperature bar setting. The default setting is

0dB, at the center of the temperature bar.

LFE Trim: lets you reduce the output to the

separate subwoofer channel by up to 10dB in

1dB steps, if the general level to the sub set up

in the Speaker Setup Menus seems too loud for

a particular Source.

Night Mode: This setting is used with specially

encoded Dolby Digital programs to compress the

signal so that louder passages do not disturb

others, while dialogue remains intelligible.

• Off: For normal listening.

• Half: Applies moderate compression.

• Full: Applies the most compression.

When you have finished making adjustments in

the Audio Effects menu, press the Audio Effects

Button or the Back/Exit Button to clear the

screen.

Advanced Features

The AVR 255/AVR 355 is equipped with a

number of advanced features that add extra

flexibility to the unit’s operation. While it is not

necessary to use these features to operate the

unit, they provide additional options that you

may wish to use.

System Settings

The AVR 255/AVR 355 offers system settings

that allow you to make the receiver easier to use

rather than directly affecting performance.These

settings may be accessed from the System

Settings menu, which is selected

by pressing the AVR Button and navigating to

the System line. Press the OK Button to display

the System Settings menu. See Figure 22.

Figure 22 – Systems Settings Screen

Front Panel Dimmer: Some people find the

front-panel messages distracting while watching

a movie. The AVR 255/AVR 355 allows you to

dim the front-panel lighting or turn it off

altogether. When the display is partly or fully

dimmed, it will return to full brightness for five

seconds whenever a command is entered, and

hen it will dim again. Select On 100% for full

brightness, dim to 50% or 25% of full

brightness or select Off to fully darken the

display. The light inside the Volume Control will

go out when the display is partly or fully

dimmed, but the Power Indicator will always

remain lit to remind you that the AVR is powered

on.

General AVR Settings

Volume Units: Select whether volume is

displayed in the conventional decibel scale or on

a numeric scale from 0 to 100. When the decibel

scale is used, 0dB is the maximum volume, with

lower volumes measured as negative values.

Volume Default and Volume Default Level:

These two settings are used together to program

a volume level the AVR will always switch to

when turned on. This feature avoids discomfort

for listeners in case the last user turned the

volume very high.

Turn Volume Default on, and then set the

Volume Default Level to the desired turn-on

volume.

Unit of Measure: This setting only affects the

speaker-distance settings when performing

Manual Speaker Setup. Select between meters

and feet.

iPod Charging: (AVR 355 only). When docked

in a Bridge2 Docking Station, plugged into the

Bridge Connector 8 on the rear panel, you may

select that your iPod is being charged all the

time, or that no charging is taking place.

Language: Select the preferred language for

the AVR’s on-screen menus and displays:

English, French, Spanish, German, Italian or

Russian.

HDMI Audio to TV: This setting determines

whether audio signals received through any of

the HDMI Inputs are passed through the HDMI

Output to the video display. In normal operation,

leave this setting Off, as audio will be played

through the AVR rather than the video display’s

built-in speakers. However, sometimes you may

wish to use the TV by itself, without using the

complete home theater system. For those

occasions change this setting to On.You may

always mute the TV’s speakers when using the

AVR for audio.

Audio Effects Advanced Features

38 ADVANCED FEATURES

Harman Kardon AVR255 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR255

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info