Bedienungsanleitung Harman Kardon AVR2600 (Seite 10 von 63) (Englisch)

502785

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

REAR - PANEL CONNECTIONS

Main Power Switch: This mechanical switch turns the

power supply on or off. It is usually left on, and cannot be turned

on or off using the remote control.

6-/8-Channel Inputs: Connect the multichannel analog

audio outputs of a non-HDMI player (DVD-Audio, SACD

™

, Blu-ray

Disc

™

or HD-DVD, or any other external decoder) to these jacks.

See page 30 for more information.

Coaxial 1/2 and Optical 1/2 Digital Audio

Inputs: If a source has a compatible digital audio output, and

if you are not using an HDMI connection for audio for the device,

connect it to one of these jacks to hear digital audio formats, such

as Dolby Digital, DTS and linear PCM. Use only one type of digital

audio connection for each source.

Coaxial Digital Audio Output: If a source is also

an audio recorder, connect the Coaxial Digital Audio Output to the

recorder’s matching input for improved recording quality. Only PCM

digital audio signals are available for recording. Both coaxial and

optical digital audio signals are available at this Digital Audio Output.

SIRIUS Tuner Jack: Connect a SIRIUS satellite radio tuner

module here.

Zone 2 Infrared (IR) Input: Connect a remote IR receiver

located in the remote zone of a multizone system to this jack to

control the AVR (and any source devices connected to the Remote

IR Output) from the remote zone.

Remote Infrared (IR) Input and Output: When the

remote IR receiver on the front panel is blocked, connect an optional

IR receiver to the Remote IR Input jack. The Remote IR Output may

be connected to the Remote IR Input of a compatible product to

enable remote control through the AVR.

HDMI Inputs and Output: HDMI (High-Definition

Multimedia Interface) is a connection for transmitting digital audio

and video signals between devices. Connect up to four HDMI-

equipped source devices to the HDMI inputs using a single-cable

connection.

When you connect the HDMI Output to your video display, the

AVR 2600 will automatically transcode analog video signals to the

HDMI format, upscaling to as high as 1080p.

NOTE: When connecting a DVI-equipped display to one of

the HDMI Outputs:

• Use an HDMI-to-DVI adapter.

• Make sure the display is HDCP-compliant. If it isn’t, do not connect

it to an HDMI Output; use an analog video connection instead.

• Always make a separate audio connection.

Analog 1 – 5 Inputs: Connect the left and right analog

audio outputs of a source device to any of these inputs. These

inputs may be paired with any video inputs.

NOTES:

• The Analog 2 and 4 inputs are each associated with a set

of outputs. Consider using these connectors for an audio or

video recorder.

• You may optionally connect a source to both an analog and

digital audio input. This is useful for making recordings, for

multizone applications or simply as a backup.

Analog 2 and 4 Outputs: Connect either of these analog

audio outputs to the analog audio inputs of a recording device.

A signal is available at these outputs whenever an analog audio

source is playing.

Subwoofer Output: If you have a powered subwoofer

with a line-level input, connect it to the Subwoofer Output.

The Bridge III Input: Connect a Harman Kardon

docking station (not included) to this input for use with most docking

iPod models, 4G and later, iPhone or iPhone 3G (not included). Turn

the receiver off (Standby mode) when connecting The Bridge III.

Fan Vents: This area contains vents used by the AVR 2600’s

fan to cool the system. Maintain a clearance of at least 3 inches

from the nearest surface to avoid overheating the unit. It is normal

for the fan to remain off at most normal volume levels. An automatic

temperature sensor turns the fan on only when it is needed.

IMPORTANT NOTE: Never block the fan vents, as doing

so could allow the AVR to overheat to dangerous levels.

Video 1/2 / 3 Inputs: Use these jacks to connect your video-

capable source components (e.g., VCR, DVD player, cable TV box) to

the receiver. Use only one type of video connection for each source.

Video 2 Output: Connect this analog video output to the

composite video input of a recording device. A signal is available

at this output whenever an analog video source is playing.

Video Monitor Output: If any of your sources use

composite video connections, connect this monitor output to the

corresponding input on your video display. If your video display

is equipped with HDMI or component video inputs, this connection

is unnecessary, as the AVR 2600 will convert the composite video

source signal to the correct format for a single video-cable

connection to the TV.

Component Video 1/2 Inputs: If a video source has

analog component video (Y/Pb/Pr) capability, and if you are not

using an HDMI connection, connect the component video outputs

of the source to one of the sets of component video inputs. Do not

make any other video connections to that source.

Component Video Monitor Outputs: If you are

using one of the Component Video Inputs and your television or

video display is component-video-capable (but does not have an

HDMI input), connect these jacks to the video display.

AVR 2600 OM.qxd 4/29/09 12:10 PM Page 10

Harman Kardon AVR2600 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info