Bedienungsanleitung Harman Kardon AVR354 (Seite 16 von 76) (Englisch)

502622

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ZONE 2 REMOTE CONTROL FUNCTIONS

The Zone 2 remote is a simplified device for use in the remote room of

a multiroom system with an IR receiver connected to the Multiroom IR

Input. It may be used to control the power, volume and mute functions

for the remote zone; select a source input for the remote zone and con-

trol a compatible Harman Kardon DVD, CD or tape player that is con-

nected to one of the AVR’s Remote IR Outputs.

The Zone 2 remote may also be used in the main listening room to

directly control the AVR 354 and Harman Kardon DVD, CD or tape

players. In that case the power, volume and mute controls will affect

only the main listening area.

The Zone 2 remote requires two AAA batteries (included) that are

installed in the battery compartment on the back of the remote. Gently

pull down on the tab at the top of the battery compartment cover and

pull the cover off the remote. Make sure to observe proper polarity by

matching the + and – symbols on the remote to the corresponding

symbols printed inside the compartment.

IR Transmitter: This button-shaped lens emits infrared codes when

buttons on the remote are pressed. Make sure it is pointing toward the

IR receiver when in the remote room, or the component being operated

when used in the main listening room.

Power Off: Press this button to turn off the AVR 354. The Zone 2

remote has no Power On Button, since the AVR turns on its multiroom

system automatically when any of the Input Selectors is pressed, even

if the AVR itself is in Standby mode. When in the main listening room,

press any Input Selector or the AVR Selector to turn on the AVR 354,

as you would when using the main system remote.

Mute: Press this button to mute the AVR 354’s remote zone speakers

temporarily. To end the muting, press this button or adjust the volume,

or turn off the multiroom system. Unless the remote is used in the main

listening area, only the remote zone will be affected.

Source Selectors: Press one of these buttons to select a source

device for the remote zone. It will also turn on the multiroom system

and switch the remote to operate the source device. You may select a

different source device than is in use in the main room. If you select the

same source as the main room, then any commands sent to the source,

such as changing radio stations or skipping tracks on a CD, will affect

both zones. The first press of the Radio Selector switches the AVR to the

last-used tuner band (AM, FM or XM). Each successive press changes

the band.

NOTE: The blank button to the left of the Radio Selector is not

used, even though pressing it causes the Zone Indicator to light up.

Transport Controls: These buttons have no effect on the receiver,

but are used to control many source components.

AVR Settings Button: Press this button to display the AVR’s Main

Menu. It is also used to switch the remote’s device mode from a source

device to the AVR.

Info Settings Button: Press this button to display the AVR’s Info

Menu, which contains the settings for the current source.

Sleep Settings Button: Press this button to activate the sleep timer,

which turns off the receiver after a programmed period of time of up to

90 minutes. Each successive press increases the timer by 10 minutes,

ending with the “Sleep Off” message.

Back/Exit: Press this button to return to the previous menu or to exit

the menu system. This button may have the same effect with some

source devices.

Menu Button: This button is used to display the main menu on some

source devices. To display the AVR 354’s main menu, press the AVR

Settings Button.

Navigation (

⁄

‹

›

) and OK Buttons: These buttons are

used to make selections within the menu system. These buttons are

also used to operate the tuner.

Zone Selector and Zone Indicator: Each press of the Zone

Selector determines whether the AVR commands will affect the main

listening area (Zone 1) or the remote zone (Zone 2). The Zone Indicator

will turn green when Zone 1 has been selected, and red for Zone 2.

The Zone Indicator will also light briefly whenever any button is pressed.

Volume Controls: Press these buttons to raise or lower the volume

in the remote zone.

AVR354 OM.qxd 9/26/08 12:26 PM Page 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR354 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info