Bedienungsanleitung Harman Kardon AVR354 (Seite 25 von 76) (Englisch)

502622

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

INSTALLATION

You are now ready to connect the various components to the receiver.

Before beginning, turn off all components, including the AVR 354,

and

unplug their power cords. Don’t plug in any of the power cords

until you have finished making all of your connections.

Remember that the receiver generates heat while it is on. Select a

location that leaves several inches of space on all sides of the receiver.

Avoid completely enclosing the receiver inside an unventilated cabinet.

It is preferable to place components on separate shelves rather than

stacking them directly on top of the receiver. Some surface finishes are

delicate. Try to select a location with a sturdy surface finish.

Step One – Connect the Speakers

If you have not yet done so, place your speakers in the listening room,

as described in the Speaker Placement section above.

Connect the center, front left, front right, surround left, surround

right, surround back left and surround back right loudspeakers to the

corresponding speaker terminals on the AVR 354. See Figure 17.

Maintain the proper polarity by always connecting the positive and

negative terminals on each speaker to the positive and negative

terminals on the receiver. Use the Connection Color Guide on page 19

as a reference.

Figure 17 – Speaker Connections

NOTE: If you only have one surround back speaker, wait until after

you have run the EzSet/EQ process in the Initial Setup section

before connecting it to the Surround Back Left speaker outputs.

Step Two – Connect the Subwoofer

Connect the Subwoofer Output on the AVR 354 to the line-level input

on your subwoofer. See Figure 18. Consult the manufacturer’s guide for

the subwoofer for additional information.

When the system has two subwoofers for a 7.2-channel system, use a

Y-adapter (not included) with one male RCA plug and two female RCA

jacks. Connect the male plug to the Subwoofer Output, and connect

each female jack to a cable that is then plugged into the line-level input

on each subwoofer.

Figure 18 – Subwoofer Connection

Step Three – Connect the Antennas

Connect the FM and AM antennas to their terminals. If you have

purchased an XM antenna module designed for connection to an

XM Ready device, connect it now. To enjoy XM Radio, remember to

purchase a subscription and activate your antenna module. More

information is available at www.xmradio.com. See Figure 19.

Figure 19 – Antenna Connections

Step Four – Connect the Source Components

A source is a device where the audio and video signals originate. Some

sources, such as CD players, only offer audio, while sources used for

watching movies or broadcast-television programming deliver a video

signal as well.

Referring to the photograph of the AVR 354 remote control on page 15,

there is a section of 8 buttons near the top of the remote designated

“Source Selectors”: Cable/Sat, DVD, Media Server, Radio, TV, Game,

The Bridge and AUX. Each of these buttons corresponds to a “source

input”. The AVR 354’s flexible design allows you to use almost any

combination of audio and video connections for each source device.

The goal of Step Four of the Installation is to match up each of your

source devices, e.g., DVD player and cable television box, with the

correct connectors on the AVR 354.

NOTE: This is not true of The Bridge II and the tuner, which use

dedicated audio source signals, and a dedicated video signal when

applicable for The Bridge II.

You may connect a source device to any appropriate input connectors.

Write down which audio and video inputs are used for each device in

Table A5 in the appendix. Table A2 indicates the default input-connection

assignments, any of which may be changed to match the actual connec-

tions in your system.

AVR 354

SUB

AVR 354

FR FL

SBR

SBL

AVR354 OM.qxd 9/26/08 12:26 PM Page 25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR354 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info