Bedienungsanleitung Harman Kardon AVR355 (Seite 13 von 58) (Englisch)

502548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

ZONE 2 REMOTE CONTROL FUNCTIONS 13

ENGLISH

Zone 2 Remote Control Functions (Zone 2 Remote Control only with AVR 355)

A Power Off

B AVR Settings

C Back/Exit Button

D Source Selectors

E Menu Navigation Buttons

F Volume Up/Down

G Mute

H Transport Controls

I Sleep Button

J Settings Info Button

K Menu Button

L OK Button

M Zone Select Buttons

NOTE: The Zone II.4 remote may be used in

either the same room where the AVR is located,

or it may be used in a separate room with an

optional infrared sensor that is connected to the

AVR’s Zone 2 IN input jack

. When it is used

in the same room as the AVR, it will control the

functions of the AVR or any compatible

Harman Kardon products in that room.When it

is used in a separate room via a sensor

connected to the Zone 2 IN Jack

, the but-

tons for power, input source, volume and mute

will control the source and volume for the sec-

ond zone, as connected to the Zone 2 Out

Jacks

. (See page 35 for complete information

on using the Multiroom system.)

The Zone II remote may be used in either the

same room where the AVR is located, or it may

be used in a separate room with an optional

infrared sensor that is connected to the AVR’s

Zone 2 input jack

or an A-BUS device.

A Power Off: When used in the room where

the AVR is located, press this button to place the

unit in Standby. When it is used in a remote

room with a sensor that is connected to the

Zone 2 jack

, this button turns the Multi-

Room system off.

B AVR Settings: Open the AVR settings info

screen with this Button.

C Back/Exit Button: Press this button to go

back to the previous Menu or to exit a Menu.

D Source Selectors: Press these buttons to

select an input source for theAVR 355/AVR 255.

E Menu Navigation Buttons: Use these

buttons to move Up, Down, Left or Right when

using the Menu system of the AVR 355/AVR 255.

F Volume Up/Down: When used in the

room where the AVR is located, press this button

to raise or lower the volume in that room.When

it is used in a remote room with a sensor that is

connected to the Zone 2 Jack

, this button

will raise or lower the volume in the remote

room.

G Mute: When used in the room where the

AVR is located, press this button to temporarily

silence the unit. When it is used in a remote

room with a sensor that is connected to the

Zone 2 Jack

, this button will temporarily

silence the feed to the remote room only. Press

the button again to return to the previous

volume level.

Important Note: No matter in which room the

Zone II remote is used, as with the main remote

it is important to remember to press the Source

Selector button D that corresponds to the

unit you wish to operate befor you change the

device to be controlled.

H Transport Control Buttons: These

buttons do not have any functions for the AVR,

but they are programmed for the forward/

reverse play operation of a wide variety of

Harman Kardon CD or DVD players, and audio or

video- cassette recorders.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR355 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info