Bedienungsanleitung Harman Kardon AVR355 (Seite 16 von 58) (Englisch)

502548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Referring to drawing of the remote control on

page 11,there is a section of 7 buttons marked

C, (AVR 355: 8 Buttons) near the top of the

remote designated “Source Selectors”:

Cable/Sat, DVD, Media Server, Radio, TV, Game

and AUX. Each of these buttons corresponds to

a “source input”. The AVR’s flexible design

llows you to use almost any combination of

audio and video connections for each source

device. The goal of the installation is to match

up each of your source devices, e.g., DVD player

and cable television box, with the correct con-

nectors on the AVR.

You may connect a source device to any appro-

priate input connectors.Note which audio and

video inputs are used for each device in Table A5

in the appendix. Table A1 indicates the default

input-connection assignments, any of which may

be changed to match the actual connections in

your system.

The precise connections to be made depend on

the capabilities of the source device and your

video display (TV). Select the best audio and

video connections for each source.

Analog and Digital Input Connections

1. Connect the analog output of a CD player to

any of the analog audio inputs.

NOTE: When the CD player has both fixed and

variable audio outputs it is best to use the fixed

output unless you find that the input to the

receiver is so low that the sound is noisy, or so

high that the signal is distorted.

2. Connect the analog Play/Out jacks of a cas-

sette deck, MD, CD-R or other audio recorder to

the analog audio input jacks

. Connect the

analog Record/In jacks on the recorder to the

audio output jacks

on the AVR.

3. Connect the digital output of any digital

sources such as a CD or DVD changer or player,

advanced video game, a digital satellite receiver,

HDTV tuner or digital cable set-top box or the

output of a compatible computer sound card to

the Optical and Coaxial Digital Inputs

RN*&

We recommend connecting the coaxial digital

audio output of your DVD player to the Coax 1

Digital Audio Input

, since that digital input

is assigned to the DVD source by default.

If your DVD player has HDMI connection, use

HDMI connection instead.

Although there is no official source on the AVR

named CD, Phono or Audio, you may assign the

audio device to an available source, such as TV

(if the Cable/Sat source is in use for broadcast

television), Game or AUX.

You can then add the name of the unit to the

name of the assigned input, to make it read for

example: "AUX - CD". (Please note that the AVR

does not have a Phono input with RIAA for

direct hook-up to a record player. You must use a

separate RIAA preamplifier between a record

player and the AVR)

NOTE: If you wish for your digital source device

to be available for use by the multiroom system,

you will need to connect its analog audio

outputs to the appropriate inputs on the

VR 255/AVR 355, as the multiroom system is

not capable of distributing digital signals to the

remote zone.

4. Connect the Coaxial or Optical Digital

Outputs

on the rear panel of the AVR to the

matching digital input connections on a CD-R or

MiniDisc recorder.

5. Assemble the AM Loop Antenna supplied with

the unit as shown below. Connect it to the AM

and GND screw terminals

6. Connect the supplied FM antenna to the FM

(75 ohm) connection

. The FM antenna may

be an external roof antenna, an inside powered

or wire lead antenna or a connection from a

cable system. Note that if the antenna or

connection uses 300-ohm twin-lead cable, you

should use a 300-ohm-to-75-ohm adapter to

make the connection.

7. With the AVR 355 turned off, connect the

optional Harman Kardon to

Digital Media Player (DMP) Connector

Your compatible Apple

iPod

may be docked in

when you wish to use it as your audio

source device. This function is available on the

AVR 355 only. The AVR 255 features a STEREO

JACK Input instead to which all sorts of portable

devices can be connected via the headphone

output of such device.

8. Connect the front, center and surround

speaker outputs

DEFO

to the respective

speakers.

To assure that all the audio signals are carried to

your speakers without loss of clarity or

resolution, we suggest that you use high-quality

speaker cable. Many brands of cable are

available and the choice of cable may be

influenced by the distance between your

speakers and the receiver, the type of speakers

ou use, personal preferences and other factors.

Your dealer or installer is a valuable resource to

consult in selecting the proper cable.

Regardless of the brand of cable selected, we

recommend that you use a cable constructed of

fine, multistrand copper with a cross-section

reater than 2 mm

Cable with a cross-section of 1.5 mm

may be

used for short runs of less than 4 m. We do not

recommend that you use cables with a cross-sec-

tion less than 1 mm

due to the power loss and

degradation in performance that will occur.

Cables that are run inside walls should have the

appropriate markings to indicate listing with any

appropriate testing agency standards. Questions

about running cables inside walls should be

referred to your installer or a licensed electrician

who is familiar with the applicable local building

codes in your area.

When connecting wires to the speakers, be cer-

tain to observe proper polarity. Note that the

positive (+) terminal of each speaker connection

now carries a specific color code as noted on

page 8. However, most speakers will still use a

red terminal for the postive (+) connection.

Connect the “negative” or “black” wire to the

same terminal on both the receiver and the

speaker.

NOTE: While most speaker manufacturers

adhere to an industry convention of using black

terminals for negative and red ones for positive,

some manufacturers may vary from this

configuration. To assure proper phase and

optimal performance, consult the identification

plate on your speaker or the speaker’s manual to

verify polarity. If you do not know the polarity of

your speaker, ask your dealer for advice before

proceeding, or consult the speaker’s

manufacturer.

We also recommend that the length of cable

used to connect speaker pairs be identical. For

example, use the same length piece of cable to

connect the front-left and front-right or

surround-left and surround-right speakers,

even if the speakers are a different distance

from the AVR.

Installation and Connections

16 INSTALLATION AND CONNECTIONS

Harman Kardon AVR355 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info