Bedienungsanleitung Harman Kardon AVR355 (Seite 30 von 58) (Englisch)

502548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Operation

asic Operation

nce you have completed the setup and configu-

ration of the AVR, it is simple to operate and

enjoy.The following instructions should be

followed for you to maximize your enjoyment of

your new receiver:

Turning the AVR On or Off

• When using the AVR for the first time, you must

press the Main Power Switch

on the rear

panel to turn the unit on.This places the unit in

Standby mode, as indicated by the amber color of

the Power Indicator

. Once the unit is in

Standby, you may begin a listening session by

pressing the System Power Control

or on

he front panel or the

AVR Power ON Button on the remote A.

Note that the Power Indicator

turns white.

This will turn the unit on and return it to the input

source that was last used. The unit may also be

turned on from Standby by pressing any of the

Source Selector buttons on the remote C,

except the "Bridge" Button on the AVR 355

remote.

To turn the unit off at the end of a listening

session, simply press the System Power

Control

on the front panel or the AVR

Power Off Button B on the remote. Power

will be shut off to any equipment plugged into

the front panel Switched AC Outlets

and

the Power Indicator

will turn amber.

When the remote is used to turn the unit “off” it

is actually placing the system in a Standby mode,

as indicated by the amber color of the Power

Indicator

When you will be away from home for an

extended period of time it is always a good idea

to completely turn the unit off with the rear

panel Main Power Switch

NOTE: All preset memories may be lost if the

unit is left turned off with the Main Power

Switch

for more than two weeks.

Using the Sleep Timer

• To program the AVR for automatic turn-off,

press the Sleep Button G on the remote. Each

press of the button will increase the time before

shut down in the following sequence:

The sleep time will be displayed in the Main

Information Display

and it will count

down until the time has elapsed.

When the programmed sleep time has elapsed,

the unit will automatically turn off (to Standby

mode). Note that the front panel display will dim

to one half brightness when the Sleep function

is programmed. To cancel the Sleep function,

press and hold the Sleep Button G until the

information display returns to normal brightness

nd the Sleep indicator numbers disappear and

the words SLEEP OFF appear in the

Main Information Display

Mute Function

To temporarily mute all speakers and the head-

phones, press the MuteButton on the remote

R. Any recording in progress will not be affect-

ed. The MUTE message will appear in the display

as a reminder. To restore normal audio, either

press the Mute Button again, or adjust the vol-

ume. Turning off the AVR will also end muting.

Audio Effects

Depending on the specific characteristics of your

listening room, you may wish to tweak some of

the audio settings, such as tone controls, to

improve performance. Access these settings from

the Audio Effects Button 9D, as described in

the Advanced Functions section.

It is not necessary to adjust the Audio Effects

settings to enjoy your new AVR. We recommend

leaving the settings at their default values until

you are more familiar with your system.

Video Modes

The settings in the Video Modes menu are used

to fine-tune the picture if necessary after making

all adjustments on the video display. It is recom-

mended that you leave the settings at their

defaults. See the Advanced Functions section for

detailed information.

Source Selection

For direct access to any source, press its Source

Selector Button C on the remote control.

Alternatively, Sources can be selected from the

Source Selection Menu, available by pressing the

AVR Settings Button Y on the remote, followed

by the OK Button X. The list showing available

inputs slides in from the right. Simply scroll up

and down to the desired input, then press OK on

the remote.

• The input source may also be changed by

pressing the front-panel Source List Button

. This opens the on-screen Source Selection

Menu with the slide-in Source List already open.

If you are not using your TV for on-screen refer-

ence, use the Front Panel Information Display

which shows the information you need. Scroll up

and down with the KL Buttons

, select

the desired Input by pressing the OK Button

and exit the Source Selection function by press-

ing the Source List Button

again.

• The front-panel Video Inputs

(

, Optical

Digital Input

)

or the Coaxial Digital

Input

may be used to connect a device such

as a video game or camcorder to your home

entertainment system on a temporary basis.

• As the input source is changed, the new input

name will appear momentarily as on-screen

information in the video display. The input name

will also appear in the Main Information

Display #.

• (AVR 355 only) When Digital Media

Player (DMP) source is selected, if a compatible

Apple iPod device is inserted in an optional

Harman Kardon that is connected to

DMP Connector

on the rear

panel, function messages will appear on any

video display connected to the AVR, and the

remote control may be used to navigate the iPod

and access many of its functions. The function

messages will also appear in the front-panel dis-

play, and the iPod’s battery may be charged. See

the owner’s guides for and your iPod

for more information.

Video Input Selection

When a source is selected, the AVR switches to a

Video Input that has either been assigned to

that Source by you, or to the default Video Input

if you have not assigned any.All inputs except

Radio are combined Audio and Video Inputs,

functioning as audio-only inputs when no video

signal is present. Refer to the Setup section of

this manual for explanation of assigning video

inputs to each source.

30 OPERATION

Harman Kardon AVR355 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info