Bedienungsanleitung Harman Kardon AVR355 (Seite 45 von 58) (Englisch)

502548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Programming the Remote

Notes on Using the AVR

Remote With Other Devices.

• Manufacturers may use different code sets for

he same product category. For that reason, it is

important that you check to see if the code set

you have entered operates as many controls as

ossible. If it appears that only a few functions

operate, check to see if another code set will

work with more buttons.

• Depending on the brand and product type

used the functions listed in the Function List

tables may not correspond with the function the

unit reacts on the command. In these cases it’s a

good idea to edit the reaction of the unit into

the corresponding line of the table or to set up a

separate list.

• When a button is pressed on the AVR remote,

the red light under the Input Selector

for the product being operated should flash

briefly. If the Device Control Selector flashes for

some but not all buttons for a particular

product, it does NOT indicate a problem with the

remote, but rather that no function is

programmed for the button being pushed.

unch-Through Programming

he AVR 355/AVR 255 remote’s punch-through

feature allows you to select one component for

the remote to operate, while simultaneously set-

ting certain groups of controls to operate anoth-

er component. For example, while using the AVR

to control surround modes and other audio func-

tions, you may operate the transport controls of

your DVD player. Or while using the remote to

control video functions on your TV, you may use

our cable box to change channels.

To program punch-through control while operat-

ing any device:

1. Press and hold the Source Selector (or AVR

selector) for the main device the remote will

be operating. The Source Selector will light, go

dark and then light up again, indicating the

remote is in Program mode and that you may

release the button.

2. Select the type of punch-through program-

ming.

a) To program channel control punch-through,

press the Channel Up Button.

b) To program transport control punch-

through, press the Play Button.

3. Press the Source Selector for the device whose

channel or transport controls you would like

to be active while operating the device you

selected in the first step.The Source Selector

will flash to confirm the programming.

For example, if you wish to watch your TV while

changing channels using your cable box, first

press the TV Button until it lights. Then press the

Channel Up Button, followed by the CBL/SAT

Button.

To undo punch-through programming, follow

the same steps as above, but press the same

Source Selector in Steps 1 and 3.

NOTE: The remote always allows volume-control

punchthrough, since the Volume and Mute con-

trols are dedicated to the AVR.

esetting the Remote Memory

As you add components to your home-theater

system, occasionally you may wish to totally

reprogram the remote control without the

confusion of any commands, activities or ”Punch-

Through“ programming that you may have done.

To do this, it is possible to reset the remote to the

original factory defaults and command codes by

following these steps. Note, however, that once

the remote is reset, all commands or codes that

you have entered will be erased and will need to

be re-entered:

1. Press the TV Device Button

and the "0"

umber Button

imultaneously.The TV button

lights up.

2. Press the ”3“ button

three times.

3.After a number of seconds, depending on the

number of commands that are programmed and

need erasing, all the Device Buttons

as well as

the AVR Button

blink 3 times to indicate that

the remote has been reset to the factory settings.

ENGLISH

PROGRAMMING THE REMOTE 45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR355 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info