Bedienungsanleitung Harman Kardon AVR445 (Seite 7 von 64) (Englisch)

502543

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

FRONT-PANEL CONTROLS

he following controls and jacks are located behind the front-panel door. To open the door, place the edge of a finger on the left or right edge of the panel and gently swing the

door down toward you.

A Main Power Switch: Press this switch to apply

power to the AVR 445. When the switch is pressed

in, the unit is placed in a Standby mode, as indicated

by the amber illumination surrounding the

Standby/On

Switch

1. This button MUST be pressed in to

operate the unit. To turn the unit off and prevent the

use of the remote control, this switch should be

pressed until it pops out from the front panel so that

the word “OFF” may be read at the top of the switch.

NOTE: This switch is normally left in the “ON” position.

B Headphone Jack: This jack may be used to lis-

ten to the AVR 445’s output through a pair of head-

phones. Be certain that the headphones have a stan-

dard 1/4" stereo phone plug, or that you use an

adapter, as needed, to convert the plug on your head-

phones to the 1/4" jack used on the AVR. When the

headphone jack is in use, the main room speakers

will automatically be turned off and the unit will

output a standard stereo signal. You may also use

the Dolby Headphone mode for an enhanced

listening experience.

C Tone Mode Button: This button controls the tone

mode settings, enabling adjustment of the bass and

treble boost/cut. You may also use it to take the tone

controls

out of the signal path completely for “flat”

response. The first press of the button displays a

TONE MODE message in the Lower Display

Line

$ and in the on-screen display. To take the

controls out of the signal path, press either of the

‹/› Buttons H until the display reads TONE

OUT

. To change the bass or treble settings, press

the button again until the desired option appears in the

Lower Display Line $ and in the on-screen display

and then press either of the

‹/› Buttons H to

enter the desired boost or cut setting. See page 35

for more information on the tone controls.

D Speaker Selector Button: Press this button

to begin the process of manually configuring the

AVR 445 for the type of speakers it is being used

with. For complete information on configuring the

speaker settings, see page 29.

E Channel Adjust Selector: Press the button to

begin the process of manually adjusting the channel

level outputs using the source currently playing

through your AVR. For complete information on

adjusting the channel output level, see page 41.

F Digital Input Selector: Press this button to begin

the process of selecting a digital source for use with

the currently selected input. Once the button has been

pressed, use the

‹/› Buttons H to choose the

desired input and then press the

Set Button I to

enter the setting into the unit’s memory. See page 35

for more information on digital audio.

G Delay Adjust Selector: Press this button to begin

the process of adjusting the delay settings. See page

30 for more information on delay adjustments.

H‹/› Buttons: When making system configura-

tion changes using the front-panel controls, press

these buttons to scroll through the available choices

for the option being adjusted.

I Set Button: When making system configuration

changes using the

front-panel controls, press this but-

ton to enter a setting into the unit’s memory.

J EzSet/EQ Microphone Jack: Before starting the

EzSet/EQ automated setup process, plug the micro-

phone into this jack.

The microphone does not need

to be plugged in at other times.

K Optical 4 Digital Input: Connect the optical digital

output of an audio or video product to this jack.

L Coaxial 4 Digital Input: Connect the coaxial

digital output of a digital audio product such as a

portable audio player or video game to this jack.

M Input/Output Status Indicator: This LED

indicator will normally light green to show that the front-

panel

Video 4 Input/Output Jacks N are operating

as inputs

. When these jacks are configured for use as

outputs, the indicator will turn red to show that the jack

may be used as an output for recording. (See pages 22

and 40 for more information on configuring the front-

panel jacks as outputs, rather than inputs.)

N Video 4 Input/Output Jacks: These audio/video

jacks may be used as either inputs or outputs for

temporary connection to video games or portable

audio/video products such as camcorders and

portable audio players. (See pages 22 and 40 for

more information on switching these jacks between

inputs and outputs.)

H H

J K LN

VR 445

XMFMAM

USB

DMP

TAPE

8CH

6CH

DVD

DIGITAL PLUS

PRO LOGIC IIx

HEADPHONE

VIRTUAL SPEAKER

57CH. STEREO

DIRECT

DSP

SURR. OFF

CDMI

HDMI 12

VID 34

VID 12

AVR445 OM 6/23/06 3:13 PM Page 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR445 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR445

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info