502646
16
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
Remote Control Functions
n Memory Button: Press this
button to enter a radio station into
the AVR45’s preset memory. After
pressing the button the MEMORY
indicator N will flash, and you then
have five seconds to enter a present
memory location using the Numeric
Keys l. (See page 26 for more
information.)
NOTE: Although the word “Sleep”
appears above this button, it refers
to control of devices other than the
AVR45. Use the Sleep button ` to
control the AVR45’s Sleep function.
o Info Button: This button does
not function with the AVR45, but it is
available for use with other devices.
p Light Button: Press this button
to activate the remote’s built-in back-
light for better legibility of the buttons
in a darkened room.
q Tuner Mode: Press this button
when the tuner is in use to select
between automatic tuning and
manual tuning. When the button is
pressed so that the AUTO indicator
O goes out, pressing the Tuning
buttons t will move the frequency
up or down in single-step incre-
ments. When the FM band is in
use, pressing this button when a
station’s signal is weak will change
to monaural reception, as indicated
by the MONO indicator Q. (See page
26 for more information.)
r Clear Button: This button does
not function with the AVR45, but it is
available for use with other devices.
s Preset Up/Down: When the
tuner is in use, these buttons scroll
through the stations that have been
programmed into the AVR45’s mem-
ory. When many source devices,
such as CD players, VCRs and cas-
sette decks, are selected using the
Device Control Selectors b,
these buttons will normally function
as chapter step or track advance.
t Tuning Up/Down: When the
tuner is in use, these buttons will
tune up or down through the select-
ed frequency band. If the Tuner
Mode button q has been pressed
so that the AUTO indicator O is illu-
minated, pressing these buttons will
cause the tuner to seek the next sta-
tion with acceptable signal strength
for quality reception. When the AUTO
indicator O is NOT illuminated,
pressing these buttons will tune sta-
tions in single-step increments. (See
page 26 for more information.)
u Transport Controls: These con-
trols do not control any functions of
the AVR45, but they are used exten-
sively when operating a wide variety
of CD players, cassette decks and
VCRs. (See page 28 for information
on programming the remote to utilize
these buttons.)
v Delay/Prev Ch.: Press this but-
ton to begin the process for setting
the delay times used by the AVR45
when processing surround sound.
After pressing this button the delay
times are entered by pressing the
Set button i, and then using the
/
¤
buttons g to change the set-
ting. Press the Set button again to
complete the process. (See page 20
for more information.)
w
/Digital Button: This button is
used to select the type of digital input
used with any one of the input sources
connected to the AVR45. After press-
ing this button, use the
/
¤
buttons
g to make your selection between
OPTICAL E or COAXIAL G digital.
Press the Set button i to enter
your choice. (See page 24 for more
information.)
x Speaker Configuration: Press
this button to begin the process of
configuring the AVR45’s Bass
Management System for use with
the type of speakers used in your
system. Once the button has been
pressed, use the
/
¤
buttons g to
select the channel you wish to set up.
Press the Set button i, and then
select another channel to configure.
When all adjustments have been
completed, press the Set button
twice to exit the settings and return
to normal operation. (See page 17
for more information.)
y Surround Mode Selector: Press
this button to begin the process of
changing the surround mode. After
the button has been pressed, use
the
/
¤
buttons g to select the
desired surround mode. (See page
24 for more information.) Note that this
button is also used to tune channels
when the TV is selected using the
Device Control Selector b.
When the AVR45 remote is being pro-
grammed for the codes of another
device, this button is also used in the
“Auto Search” process. (See page 28
for more information on programming
the AVR45 remote.)
z Volume: Press these buttons to
raise or lower the system volume.
` Sleep Button: Press this button
to place the unit in the Sleep mode.
After the time shown in the display,
the AVR45 will automatically go into
the Standby mode. Each press of
the button changes the time until
turn-off in the following order:
Note that this button is also used
to change channels on your TV
when the TV is selected using the
Device Control Selector b.
When the AVR45 remote is being pro-
grammed for the codes of another
device, this button is also used in the
“Auto Search” process. (See page 28
for more information on programming
the AVR45 remote.)
90
min
80
min
70
min
60
min
50
min
40
min
30
min
20
min
10
min
5
min
1
min
OFF
13
AVR45 om (G).Eng,Fr 4/16/99 11:41 AM Page 13
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR45 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info