502650
23
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
22 OPERATION
Operation
MODE
DOLBY DIGITAL
DTS
DOLBY PRO LOGIC
LOGIC 7 C
LOGIC 7 M
DOLBY 3 STEREO
THEATER
VMAx
STEREO
FEATURES
Available only with digital input sources encoded with Dolby Digital data. It provides
up to five separate main audio channels and a special dedicated Low-Frequency Effects
channel.
Available only with digital input sources encoded with DTS data.Available on special
DVD, LD and audio-only discs, DTS provides up to five separate main audio channels and
a special dedicated low-frequency channel.
The standard mode for analog surround sound decoding. It uses information encoded
in a two-channel stereo recording to produce four distinct outputs: Left, Center, Right and
a Mono Surround channel. Use this mode for accurate reproduction of programs bearing
the Dolby Surround, DTS Stereo, UltraStereo or other “Surround” logos. Surround-encoded
programs include videocassette, DVD and LD movies, TV and cable programs, radio
programs and audio CDs. Dolby Pro Logic processing may also be used to provide a
pleasing surround effect with some stereophonic source material that does not carry
surround encoding.
An advanced mode that extracts the maximum surround information from either
surround-encoded programs or conventional stereo material.When used with encoded
material, decoding is more accurate in terms of the placement of sounds, and fades and
pans are much smoother and more realistic than with other decoding techniques. Logic 7
also delivers increased spaciousness and a wider sound stage when it is used with con-
ventional stereo recordings and music programs.The Logic 7C or Cinema mode is tailored
to provide an optimal sound field for movie soundtracks.The Logic 7M or Music mode
uses a decoding formula that is best suited to music.
Uses the information contained in a surround-encoded or two-channel stereo program to
create center-channel information. In addition, the information that is normally sent to the
rear-channel surround speakers is carefully mixed in with the front-left and front-right
channels for increased realism. Use this mode when you have a center-channel speaker
but no surround speakers.
Surround processing uses matrix surround decoding to simulate a standard movie or
stage theater.
When only the two front-channel loudspeakers are used, Harman’s patented VMAx mode
delivers a three-dimensional sound space with the illusion of “phantom speakers” at the
center and surround positions.
This mode turns off all surround processing and presents the pure left and right
channel presentation of two-channel stereo programs.
DELAY TIME RANGE
Center: 0 ms – 5 ms
Surround: 0 ms –15 ms
Delay not adjustable
15 ms – 30 ms
Initial Setting = 20 ms
Delay time not adjustable
No surround channels
27.3 ms (not adjustable)
No surround channels
No surround channels
Surround Mode Chart
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info