Bedienungsanleitung Harman Kardon AVR645 (Seite 5 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

FRONT PANEL CONTROLS 5

ENGLISH

Main Power Switch: Press this button to

apply power to the AVR. When the switch is

pressed in, the unit is placed in a Standby

mode, as indicated by the orange LED

surrounding the System Power Control

This button MUST be pressed in to operate the

unit. To turn the unit off completely and prevent

the use of the remote control, this switch

should be pressed until it pops out from the

front panel so that the word “OFF” may be

read at the top of the switch.

NOTE: This switch is normally left in the “ON”

position.

System Power Control: When the Main

Power Switch

is “ON,” press this button to

turn on the AVR; press it again to turn the unit

off (to Standby). Note that the Power Indicator

surrounding the switch

will turn blue when

the unit is on.

Power Indicator: This LED will be

illuminated in orange when the unit is in the

Standby mode to signal that the unit is ready to

be turned on. When the unit is in operation, the

indicator will turn blue.

Headphone Jack: This jack may be used to

listen to the AVR’s output through a pair of head-

phones. Be certain that the headphones have a

standard 6.3 mm stereo phone plug. Note that

the main room speakers and all Preamp

Outputs

will automatically be turned off

when the headphone jack is in use.

Surround Mode Group Selector: Press this

button to select the top-level group of surround

modes. Each press of the button will select a

major mode grouping in the following order:

Dolby Modes ➜ DTS Digital Modes ➜ DSP

Modes ➜ Stereo Modes ➜ Logic 7 Modes

Once the button is pressed so that the name of

the desired surround mode group appears in the

on-screen display and in the Lower Display Line

, press the Surround Mode Selector

cycle through the individual modes available. For

example, press this button to select Dolby modes,

and then press the Surround Mode Selector

to choose from the various mode options.

Speaker Selector: Press this button to

begin the process of configuring the AVR for the

type of speakers it is being used with. For com-

plete information on configuring the speaker set-

tings using the front-panel controls see page 33.

‹

Button: When an adjustment is being

made using the Channel Select

or Digital

Select

buttons, this button may be pressed

to scroll through the available options.

Tone Mode: Pressing this button enables or

disables the Balance, Bass and Treble tone

controls. When the button is pressed so that the

words

TONE IN appear in the Main Infor-

mation Display

, the settings of the Bass

and Treble controls and of the Balance control

will affect the output signals. When the button is

pressed so that the words

TONE OUT appear

in the Main Information Display

, the

output signal will be “flat,” without any balance,

bass or treble alteration, no matter how the

actual Controls are adjusted. (For more infor-

mation, see page 41).

Front Panel Controls

)

(



Main Power Switch

System Power Control

Power Indicator

Headphone Jack

Surround Mode Group Selector

Speaker Selector

‹

Button

Tone Mode

Surround Mode Selector

Tuning Selector

Tuner Band Selector

Set Button

Preset Station Selector

›

Button

Input Source Selector

RDS Selector

Delay Adjust Selector

Digital Optical 4 Input

Input/Output Status Indicators

Digital Coax 4 Jack

Video 4 Input/Output Jacks

Front Panel Control Door

Surround Mode Indicators

Speaker/Channel Input Indicators

Digital Select Button

Channel Select Button

Volume Control

Input Indicators

Main Information Display

Remote Sensor Window

EzSet/EQ Microphone Jacks

UH IK

AVR 645

XMFMAM

USB

DMP

TAPE

8CH

6CH

DVD

DIGITAL

PRO LOGIC IIx

HEADPHONE

VIRTUAL SPEAKER

57CH. STEREO

DIRECT

DSP

SURR. OFF

CDMI

HDMI

VID 34

VID 12

29851_AVR645_ENG 30/10/06 9:46 Side 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR645 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info