Bedienungsanleitung Harman Kardon AVR645 (Seite 17 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

INSTALLATION AND CONNECTIONS 17

ENGLISH

Installation and Connections

NOTE: When connecting a device such as a digi-

tal cable box or other set-top tuner product with

a digital audio output, we recommend that you

connect both the digital and analog outputs of

the product to your AVR. The audio input polling

feature of the AVR will then be able to make cer-

tain that you have a constant audio feed, since it

will automatically switch the audio input to the

analog jacks if the digital feed is interrupted or

not available for a particular channel.

8. If you have a camcorder, video game or other

audio/video device that is connected to the AVR

on a temporary, rather than permanent basis,

connect the audio, video and digital audio out-

puts of that device to the Front Panel Inputs

*ÓÔ

. A device connected to the Video 4

jacks

is selected as the Video 4 input, and

connected to the digital jacks

*Ó

it is select-

ed as "Optical 4" or "Coaxial 4" input. (See

page 45 for more information on input configu-

ration.)

9. Connect the AVR to your video display using

one of the following connections:

• If you have a video display with an HDMI or

DVI input, make the connection using the

HDMI Output

, as described in the next

section.

• If your video display has component video

inputs (Y/Pr/Pb), connect the Component

Video Outputs

• If your display does not have digital or compo-

nent video inputs, connect the Video

Monitor Output

on the AVR to the

matching input on your display. Only one con-

nection is needed, and S-video is the higher

quality signal.

HDMI Connections

HDMI

™

is the abbreviation for High-Definition

Multimedia Interface, which is quickly becoming

the standard connection point between

advanced video/audio source products and dis-

plays, particularly for high-definition video sig-

nals. HDMI is a digital connection, eliminating

the need to convert signals back and forth from

digital to analog to deliver a higher quality signal

when used with digital sources. The signals car-

ried on HDMI may, but do not always, include

audio, offering the possibility of a complete one-

wire connection from a source to the AVR.

However, it is important to note that there are a

number of different versions of the HDMI stan-

dard in use. Before connecting any HDMI prod-

ucts to your AVR, it is helpful to find out in

advance their level of HDMI connectivity.

Some source or display components in your sys-

tem may use DVI (Digital Video Interface) for dig-

ital video connections. DVI carries the same digi-

tal video signals as HDMI but uses a larger con-

nector and does not transport audio or control

signals. In most cases, you may mix and match

DVI and HDMI digital video connections by using

optional connector adapters. Note, however, that

some DVI-equipped video displays are not com-

patible with the HDCP copy protection coding

that is increasingly carried with signals connect-

ed via HDMI. If you have an HDMI source and a

DVI-equipped display, you may occasionally be

unable to view a program if the display does not

include HDCP. This is not the fault of the AVR or

your source; it simply indicates that the video

display is not compatible.

HDMI Input Connections

The different “Version” levels of HDMI define

which type of audio signals it is compatible with.

Based on the lowest level of HDMI among your

sources, the connections to the AVR should be

made as follows:

• HDMI 1.0 sources carry digital video and mul-

tichannel or 2-channel PCM audio signals only.

Connect the HDMI output of a 1.0 source to

either of the HDMI Inputs

on the AVR. If

the product is a DVD-Audio player or other

source that has multichannel analog audio

outputs, connect them to the 8-Channel

Direct Inputs

. With an HDMI 1.0 source,

particularly a DVD player, make certain

that the menus in the source device are set to

“Bitstream Out” or “Original” so that 5.1 digi-

tal audio is available. If you find that 5.1 Dolby

Digital or DTS audio is not available on the

HDMI connection, it will be necessary to make

an additional connection between the source

and the AVR 645 to either the Coaxial

VÓ

or Optical

Digital Inputs.

• HDMI 1.1 sources carry the multichannel digi-

tal audio output from DVD-Audio players in

addition to the digital video. If you have an

HDMI 1.1-equipped product, the only connec-

tion needed for listening in the main room is

from the HDMI output of the source to either

of the HDMI Inputs

on the AVR. If the

player has SACD capability, you will need to

connect the analog outputs of the source to

the 8-Channel Direct Inputs

• HDMI 1.2 (and higher) sources should be

connected as shown above for HDMI 1.1,

except that a separate analog connection is

not needed for SACD players.

2. Connect the analog audio and video outputs

of a satellite receiver, cable TV converter or televi-

sion set or any other video source to the Video 3

jacks.

3. Connect the analog audio and video outputs

of a DVD or laser disc player to the DVD jacks

4. If any of the video source devices has analog

component video (Y/Pr/Pb) outputs, but not

HDMI, connect them to Component Video

Inputs

. The chart on page 64 has the

default settings for various source devices, but

you may make any connection and change the

configuration setting using the

IN/OUT

SETUP

menu, as described on page 24.

5. The default video connection for a DVD player

is to use the Component Video Input 3 Jacks

on the AVR, but you may change this assign-

ment in the

IN/OUT SETUP menu (see

page 24). A DVD player’s composite and S-video

outputs may also be connected to the DVD

Video Inputs

6. The default audio connection for a DVD player

is to link the coaxial digital audio output on the

DVD player to the Coaxial 1 Digital Audio

Input

, but you may also make a connection

to either the Coaxial

or Optical

digital

inputs, or the Analog DVD Audio Inputs

You may change the assignment in the

IN/OUT SETUP menu as described on page

24, or by using the front-panel Digital Input

Selector

7. If you wish to use a portable audio/video prod-

uct such as a camcorder, portable media player or

digital still camera with the AVR, or make a con-

nection to a video game console or other source

that may not always be connected to the AVR,

connect the video outputs of the source to the

Video 4 Input/Output Jacks

that are

behind the Front-Panel Door



. If the source

has digital audio outputs, connect them to the

Optical 4 Digital Input

or the Coaxial 4

Digital Jack

Connection Notes:

When making connections to the Component

Video Inputs

JLf

or the Coaxial

Optical

digital audio inputs, it is a good idea

to make note of which jacks are connected to

which source, using the Worksheet in the

Appendix. This will help simplify the configuration

process.

29851_AVR645_ENG 30/10/06 9:46 Side 17

Harman Kardon AVR645 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info