Bedienungsanleitung Harman Kardon AVR645 (Seite 37 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

SYSTEM CONFIGURATION 37

ENGLISH

System Configuration

To return to the settings established by Ezset/EQ,

even if you have made manual changes to the

output trims using the steps shown above, press

⁄

Navigation Button

F so that the

cursor is pointing to the

EZSET

SETTINGS

line and then press the

⁄

Navigation Button

F once so ON

appears in highlighted video. Remember that

after turning the Ezset/EQ settings back on you

must turn return to this menu line and change

the setting to

OFF if you wish to make any

manual trim adjustments.

The final setting in this menu enables you to

have the output levels remain the same for all

inputs or to be adjusted differently for each (or

any) input. While most listeners prefer to keep

the same output levels for all sources, you may

wish to raise or lower some channels, particularly

the subwoofer output for a specific source such

as a CD that is primarily used for music playback.

To enter individual settings for a specific channel,

first make sure that you have either run Ezset/EQ

and/or made any desired manual trim adjust-

ments to set a baseline for all channels. After

that is done, press the OSD Button E to exit

the menu system and then select the input for

which you wish to enter different level settings

by using either the Input Source Selectors

on the front panel or the buttons on the remote

that are used to select an input source BC

D. Next, return to the

CHANNEL

OUTPUT

submenu using the steps outlined

above.

At the

CHANNEL OUTPUT menu press

⁄

Navigation Button

F until the

cursor is pointing to the

LEVEL TRIM line

and then press the

⁄

Navigation Button

F once so that INDEPENDENT

appears in highlighted video. When this setting is

active you may change the channel output levels

for any input without changing the settings

previously established for another.

When all changes to the Channel Output levels

and the associated level trim settings have been

made press the

⁄

Navigation Button

F until the cursor is on the BACK TO

MANUAL SETUP

menu and then pressing

the Set Button

Q so that you may make

any other adjustments to the system parameters.

If the changes just made complete the manual

adjustments needed, press the OSD Button E

to exit the menu system and resume normal

system operation.

Additional Input Adjustments

After one input has been adjusted for Surround

mode, digital input (if any), speaker type, and

output levels, go back to the

IN/OUT

SETUP

line on the MASTER MENU

(Figure 7) and enter the settings for each input

that you will use. In most cases, only the digital

input and surround mode will be different from

one input to the next, while the speaker type,

crossover frequency, Night mode and output

level settings will usually be the same and may

be quickly entered by entering the same data

used for the original input.

Once the settings outlined on the previous pages

have been made, the AVR is ready for operation.

While there are some additional settings to be

made, these are best done after you have had an

opportunity to listen to a variety of sources and

different kinds of program material. These

advanced settings are described on pages 47 to

48 of this manual. In addition, any of the settings

made in the initial configuration of the unit may

be changed at any time. As you add new or dif-

ferent sources or speakers, or if you wish to

change a setting to better reflect your listening

taste, simply follow the instructions for changing

the settings for that parameter as shown in this

section.

Having completed the setup and configuration

process for your AVR, you are about to

experience the finest in music and home theater

listening. Enjoy!

29851_AVR645_ENG 30/10/06 9:46 Side 37

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR645 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info