Bedienungsanleitung Harman Kardon AVR645 (Seite 45 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OPERATION 45

ENGLISH

IMPORTANT NOTES ON DIGITAL PLAYBACK:

• When the digital playback source is stopped, or

in a pause, fast forward or chapter search mode,

the digital audio data will momentarily stop, and

the channel position letters inside the Speaker/

Channel Indicators

will flash. This is

normal and does not indicate a problem with

either the AVR or the source machine. The AVR

will return to digital playback as soon as the data

is available and when the machine is in a

standard play mode.

• Although the AVR will decode virtually all DVD

movies, CDs and HDTV sources, it is possible that

some future digital sources may not be compatible

with the AVR.

• Note that not all digitally encoded programs

and not all audio tracks on a DVD contain full

5.1 or 6.1 channel audio. Consult the program

guide that accompanies the DVD or laser disc to

determine which type of audio has been record-

ed on the disc. The AVR will automatically sense

the type of digital surround encoding used,

indicate it in the Channel Input Indicators

and adjust to accommodate it.

• When a Dolby Digital or DTS source is playing,

you normally may not be able to select some of

the analog surround modes such as Dolby Pro

Logic II, Dolby 3 Stereo, Hall, Theater, 5CH/7CH

Stereo or Logic 7, except with specific Dolby

Digital 2.0 recordings that can be played with

the Pro Logic II modes too (see page 42).

• When a digital source is playing, it is possible

to make an analog recording using the Tape

or Video 1 or Video 2 or

record outputs,

even if the source is connected to any digital

input of the AVR only, as long as "Surround Off"

mode is selected (possible with a PCM source

only). But the analog two channel signal, even of

a Dolby Digital (not DTS) source, the ”Downmix”

to Stereo or Dolby Surround, can be recorded by

connecting its analog audio outputs to the

appropriate analog inputs (e.g. DVD) of the AVR.

Additionally, the digital signals will be passed

through to the Digital Audio Outputs

Using

The AVR 645 is equipped for use with

Harman Kardon’s optional iPod

docking station.

When The Bridge is connected to the AVR and an

iPod properly docked, you may use either remote

to control the iPod for audio playback, while

using the front-panel display and on-screen

semi-OSD messages to help you locate tracks or

view information about the track being played. In

addition, connecting an iPod to the AVR through

The Bridge also charges the iPod’s battery. Using

the

DMP AUTO POWER menu option, as

described on page 48, you may even have the

AVR automatically turn on with your iPod as a

playback source whenever the iPod is turned on.

To select The Bridge as the AVR’s input source:

• From the front panel, press the Input Source

Selector

on the front panel as needed.

• From the main remote, press the Input DMP

Selector

• From the ZR 10 remote, press the /DMP

Selector .

When The Bridge is connected and a compatible

iPod properly docked, the iPod’s menu will be

replaced with “harman/kardon” at the top of the

iPod’s screen and the front panel display and

semi-OSD message will show messages that will

guide you through the menu and content

selection. If the Lower Display Line

shows

UNPLUGGED… message, please check to

see that the correct iPod adapter is used in The

Bridge and that the iPod is properly seated.

The AVR’s front-panel controls may also be used

to access a limited number of iPod functions.

Press the AM/FM

to play or pause the

current track. The Tuning Selector

)

may be

used to search in reverse (left side of button) or

forward (right side of button) through the tracks.

Press the Tuner Band Selector

to call up

the iPod’s menu. Press the Preset Station

Selectors

to scroll and the Set Button

to select. For complete information on using the

remote or front-panel controls to operate an

iPod, see the instructions that are included with

The Bridge.

Tape Recording

In normal operation, the audio or video source

selected for listening through the AVR is sent to

the record outputs. This means that any program

you are watching or listening to may be recorded

simply by placing machines connected to the out-

puts for Tape Outputs

or Video 1 or 2

Outputs

PRWa

in the record mode.

When a digital audio recorder is connected to

any of the Digital Audio Outputs

, you are

able to record the digital signal using a CD-R,

MiniDisc or other digital recording system.

Note that all digital signals will be passed

through to both, coaxial and optical, digital

outputs simultanously, no matter which kind of

digital input was selected.

Front Panel In/Outputs

In addition to the rear panel digital outputs, the

AVR offers Harman Kardon’s exclusive config-

urable front panel output jack feature. For easy

connection of portable devices, you may switch

the front panel Digital Coax 4 jack

or the

Video 4 jack

from an input to an output by

following these steps:

1. Press the OSD button

to view the

MASTER MENU (Figure 7).

2. Press the Set button

to enter the

IN/OUT SETUP menu (Figure 8).

3. Press the

button

so that the on-screen

➞ cursor is next to

VIDEO 4 or

COAXIAL 4 depending on which input you

wish to change to an output. Either input, or

both may be changed at any time.

4. Press either of the

‹

›

buttons

so that

the word

OUT is highlighted.

5. Press the OSD button

to exit the menus

and return to normal operation.

Note that once the setting is made, the

appropriate Input/Output Status Indicator

( will turn red, indicating that the selected

analog or digital jacks are now an output,

instead of in the default setting as an input.

Once changed to an output, the setting will

remain as long as the AVR is turned on, unless

the setting is changed in the OSD menu system,

as described above. Note, however, that once the

AVR is turned off, the setting is cancelled.When

the unit is turned on again, the front panel jacks

will return to their normal default setting as an

input. If you wish to use the jacks as an output at

a future time, the setting must be changed again

using the OSD menu system, as described above.

NOTES:

• The digital outputs are active only when a digital

signal is present, and they do not convert an

analog input to a digital signal, or change the

format of the digital signal (e.g. Dolby Digital to

PCM or vice versa, but coaxial digital signals are

converted to optical signals and vice versa). In

additon, the digital recorder must be compatible

with the output signal. For example, the PCM

digital output from a CD player may be recorded

on a CD-R or MiniDisc, but Dolby Digital or DTS

signals may not.

• To make an analog recording from a digital

source is possible, but only from a PCM source

(not Dolby Digital or DTS) and correctly only with

"Surround Off" mode (with any Surround mode

only the L/R front signals will be fed to the record

outputs).

The

Brid

Operation

29851_AVR645_ENG 30/10/06 9:46 Side 45

Harman Kardon AVR645 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info