Bedienungsanleitung Harman Kardon AVR7200 (Seite 13 von 52) (Englisch)

502637

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

MAIN REMOTE CONTROL FUNCTIONS 13

MAIN REMOTE CONTROL FUNCTIONS

MAIN REMOTE CONTROL FUNCTIONS 13

MAIN REMOTE CONTROL FUNCTIONS

Preset Up/Down Button: When the tuner is in

use, press this button to scroll through the stations

programmed into the AVR 7200’s memory.

Tuning Up/Down Button: When the tuner is

in use, this button will tune up or down through the

selected frequency band. If the

Tuning Mode Button

^ has been pressed so that AUTO appears in

the Lower Display Line B and the AUTO Indicator

J lights, pressing either button will cause the tuner to

seek the next station with acceptable signal strength for

quality reception. When

MANUAL appears in the

Lower Display Line B and the AUTO Indicator J

goes out, pressing this button will tune stations in single-

step increments. (See page 32 for more information.)

Disc Skip Button: This button has no direct

function for the AVR 7200 but may be used to

change the disc in a CD or DVD changer when the

remote is programmed for that type of device.

Program Button: This button is used to begin

the process of programming the remote. Press and hold

this button for three seconds to place the remote in the

programming mode. Once the red LED under the

Set

Button

lights, release the button. You may then

select from the desired option. (See pages 38 – 47 for

more information on configuring the remote.)

Light Button: Press this button to activate the

remote’s backlight for ease of use in darkened rooms.

Multiroom: Press this button to activate the multi-

room system or to begin the process of changing the

input or volume level for the second zone. (See page

36 for more information on the multiroom system.)

Macro Buttons: Press these buttons to store or

recall a “Macro”, which is a preprogrammed sequence

of commands stored in the remote. (See page 41 for

more information on macros.)

Sleep Button: Press this button to place the unit

in the Sleep mode. After the time shown in the display,

the AVR 7200 will automatically go into the Standby

mode. Each press of the button changes the time until

turn-off in the following order:

Night Mode Button: Press this button to acti-

vate the Night mode. This mode is available in specially

encoded Dolby Digital sources, and it preserves

dialogue (center channel) intelligibility at low volume

levels.

OSD Button: Press this button to activate the

On-Screen Display (OSD) system used to set up or

adjust the AVR 7200’s parameters.

Mute Button: Press this button to momentarily

silence the AVR 7200 or TV set being controlled,

depending on which device has been selected.

AM/FM Tuner Select: Press this button to select

the AVR 7200’s tuner as the listening choice. Pressing

this button when the tuner is already in use will select

between the AM and FM bands.

Channel Up/Down Selector: This button has no

function when the AVR is being controlled, but when

programmed for use with a VCR, TV, cable box, satel-

lite receiver or other similar product it will change the

channel up or down. See pages 38 – 47 for more

information on programming the remote.

Delay Select Button: Press this button to begin

the process for setting the delay times used by the

AVR 7200 when processing surround sound. After

pressing this button, the delay times are entered by

pressing the

Set Button

and then the

⁄

Navigation Button n to change the setting.

Press the Set Button

again to complete the

process. (See page 23 for more information on

setting delay times.)

Speaker Select Button: Press this button to

begin the process of configuring the AVR 7200’s

bass management system. Then press the

⁄

Navigation Button n to select the channel you

wish to set up. Press the Set Button

and then

select another channel to configure. When all adjust-

ments have been completed, press the

Set Button

twice to exit the settings and return to normal

operation. (See page 21 for more information on

speaker setup.)

Memory Button: Press this button to enter a

radio station into the AVR 7200’s preset memory.

Once

PRESET MEMORY flashes in the

Lower Display Line B and the Memory Indicator

G lights, you have five seconds to enter a preset

memory location using the Numeric Keys

(See page 32 for more information.)

Stereo Mode Select Button: Press this button

to select a stereo listening mode. The first press of the

button places the AVR 7200 in a true, two-channel,

left/right Stereo mode with no surround processing.

The next press selects either five-channel Stereo or

seven-channel Stereo, depending on the speaker

configuration.

DTS Neo:6 Mode Select Button: Press this

button to select a DTS Neo:6 mode. (See page 29

for the available DTS Neo:6 options.)

DTS Digital Mode Select Button: When a

DTS-encoded digital source is playing, each press of

this button will scroll through the available DTS modes.

The specific choice of modes will vary according to

the type of encoding on the disc and your system’s

speaker configuration. When a DTS source is not in

use, this button has no function. (See page 29 for the

available DTS digital options.)

Dolby Mode Select Button: This button is used

to select from the available Dolby Surround modes.

Each press of this button will select

one of the Dolby

Pro Logic II modes or Dolby 3 Stereo.

When a Dolby

Digital-encoded source is in use, the Dolby Digital

mode may also be selected. (See page 29 for the

available Dolby surround mode options.)

6-Channel/8-Channel Input Select: Press this

button to select the device connected to the 6- or 8-

Channel Direct Inputs . (See page 28 for more

information.)

SPL Select Button: This button activates the

EzSet function to quickly and accurately calibrate the

AVR 7200’s output levels. When the button is pressed

you will then need to select between automatic EzSet

operation or using the remote as a manual SPL meter

by pressing the

⁄

Navigation Button n until

your choice appears in the remote’s LCD display.

Press the

Set Button

to enter the setting, and

then follow the instructions as displayed in the LCD

display. (For complete information, see page 24.)

EzSet Microphone Sensor: The microphone

sensor that is used by the EzSet system is behind the

three slots at the top of the remote control. When

using EzSet to calibrate the AVR 7200 be certain that

the slots are not covered. (See page 24 for more

information on using EzSet.)

Lens: The infrared emitters behind the plastic

lens at the top of the remote communicate the remote

codes to the AVR 7200. Be certain that the lens is not

covered when using the remote, and point the lens

toward the AVR for best results. In learning mode, the

remote receives IR codes to be learned through a

sensor behind the lens.

NOTE: DO NOT remove the rubber plug that is supplied

to cover the jack on the upper right side of the remote.

The jack is not active and is reserved for future use.

min

OFF

AVR 7200 OM 1/27/03 4:46 PM Page 13

Harman Kardon AVR7200 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info