Bedienungsanleitung Harman Kardon AVR7200 (Seite 35 von 52) (Englisch)

502637

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ADVANCED FEATURES

ADVANCED FEATURES 35

adjust the length of time the displays remain on the

screen. Both of those options are possible with the

AVR 7200.

To turn off the semi-OSD system, you’ll need

to make an adjustment in the ADVANCED

SELECT menu (Figure 13). To start the adjust-

ment, press the OSD Button U to bring the

MASTER MENU to the screen. Press the

Navigation Button n, until the on-screen ›

cursor is next to the ADVANCED line. Press

the Set Button p to enter the ADVANCED

SELECT menu.

At the ADVANCED SELECT menu, make

certain that the on-screen

› cursor is next to the

SEMI OSD DEFAULT line by pressing the

⁄

Navigation Button n as needed. Next,

press the

› Navigation Button n so that the word

OFF is highlighted in the video display.

This setting is temporary and will remain active only

until it is changed or until the AVR 7200 is turned off.

Once the unit is turned off, the semi-OSD displays will

remain activated, even if they were switched off for the

previous listening session.

To change the length of time that the semi-OSD

displays remain on the screen, go to the ADVANCED

SELECT menu as outlined earlier, and press the

⁄

Navigation Button n as needed, until the

on-screen

›

cursor is next to the SEMI OSD

TIME OUT line. Next, press the

‹

›

Navigation

Button n until the desired time in seconds is dis-

played. Unlike most of the other options in this menu,

this is a permanent setting change, and the time-out

entry will remain in

effect until it is changed, even when

the unit is turned off.

If you wish to make other adjustments, press the

⁄

Navigation Button n until the on-screen

›

cursor is next to the desired setting or the BACK

TO MASTER MENU line and press the Set

Button p. If you have no other adjustments to

make, press the OSD Button U to exit the menu

system.

Full-OSD Time-Out Adjustment

The FULL OSD menu system is used to simplify

the setup and adjustment of the AVR 7200, using a

series of on-screen menus. The factory default setting

for these menus leaves them on the screen for 20

seconds after a period of inactivity before they disap-

pear from the screen (Time-Out). Time-Out is a safety

measure to prevent image retention of the menu text

in your monitor or projector, which might happen if it

were left on indefinitely. However, some viewers may

prefer a slightly longer or shorter period before the

Time-Out display.

To change the full-OSD Time-Out, you will need to

make an adjustment in the

ADVANCED

SELECT menu (Figure 13). To start the adjust-

ment, press the OSD Button U to bring the

MASTER MENU to the screen. Press the

Button n, until the on-screen › cursor is next to

the ADVANCED line. Press the Set Button p

to enter the ADVANCED menu (Figure 13).

At the ADVANCED SELECT menu (Figure

10) make certain that the on-screen

› cursor is next

to the FULL OSD TIME OUT line by press-

ing the

⁄

Navigation Button n as needed.

Next, press the

‹

›

Navigation Button n until

the desired time is displayed in seconds. Unlike most

of the other options in this menu, this is a permanent

setting change, and the Time-Out entry will remain in

effect until it is changed, even if the unit is turned off.

If you wish to make other adjustments, press the

⁄

Navigation Button n until the on-screen

›

cursor is next to the desired setting or the

RETURN TO MASTER MENU line and

press the Set Button p. If you have no other

adjustments to make, press the OSD Button U to

exit the menu system.

AVR 7200 OM 1/27/03 4:46 PM Page 35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR7200 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info