Bedienungsanleitung Harman Kardon AVR7300 (Seite 16 von 60) (Englisch)

502638

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

MAIN REMOTE CONTROL FUNCTIONS

a Delay Select Button: This button selects

adjustments to the A/V Sync Delay and the individual

channel delays. The first press of the button displays

an A/V SYNC DELAY message in the Lower

Display Line $ and in the on-screen display, which

means that you may change the amount of time that

all channels are delayed together behind the video.

This enables you to compensate for the loss of lip

sync that may be caused by digital video processing

in your display or by television stations. To change

the A/V Sync Delay, press the Set Button q while

the A/V SYNC DELAY message is visible

and then use the

⁄/¤ Navigation Button o

to change the setting so that the sound and the

video image are in sync. To change the delay for

an individual output channel, press the

⁄/¤

Navigation Button o until the desired channel

name is shown, and then press the Set Button q.

Use the

⁄/¤ Navigation Buttons o to change

the delay amount. (See page 28 for more information

on delay options.)

Speaker Select Button: Press this button

to begin the process of configuring the AVR 7300’s

bass management system. Then press the

⁄

Navigation Button o to select the channel you

wish to set up. Press the Set Button q and

then select another channel to configure. When all

adjustments have been completed, press the Set

Button q twice to exit the settings and return to

normal operation. (See page 26 for more information

on speaker setup.)

Memory Button: Press this button to enter a

radio station to the AVR 7300’s preset memory. First,

tune the desired station, and then press this button.

Within five seconds of when you see the station’s

frequency flash in the Upper Display Line # and

in the on-screen display, press the numeric keys

for the preset number between 01 and 30 that you

wish to assign to the station. (See page 39 for more

information.)

Stereo Mode Select Button: Press this button

to select a stereo listening mode. When the button is

pressed so that SURROUND OFF appears in

the Lower Display Line

$, the AVR will operate in

a bypass mode with true, fully analog, two-channel

left/right stereo mode with no surround processing or

bass management, as opposed to other modes where

digital processing is used. When the button is pressed

so that SURROUND OFF appears in the Lower

Display Line $, and the DSP and SURROUND

OFF Surround Mode Indicators % are lit, you will

enjoy a two-channel presentation of the sound along

with the benefits of bass management. Depending on

whether your system is configured for 5.1 or 6.1/7.1

channels, the next press of the button will cause either

5 CH STEREO or 7 CH STEREO to

appear, and the stereo signal will be routed to all five

(or seven) speakers. (See page 36 for more informa-

tion on stereo playback modes.)

DTS Neo:6 Mode Select Button: Press this

button as needed to select one of the DTS Neo:6

modes. (See page 36 for the available DTS Neo:6

options.)

Logic 7 Mode Select Button: Press this button

to select from among the available Logic 7 surround

modes. (See page 36 for the available Logic 7 options.)

DTS Digital Mode Select Button: When a

DTS-encoded digital source is playing, each press of

this button will scroll through the available DTS modes.

The specific choice of modes will vary according to

the type of encoding on the disc and your system’s

speaker configuration. When a DTS source is not in

use, this button has no function. (See page 36 for the

available DTS digital options.)

Dolby Mode Select Button: This button is used

to select from the available Dolby Surround modes.

Each press of this button will select

one of the Dolby

Pro Logic II or Dolby Pro Logic IIx modes.

When a

Dolby Digital-encoded source is in use, Dolby Digital

or Dolby Digital EX mode may also be selected.

(See page 36 for the available Dolby surround

mode options.)

6/8-Channel Input Select: Press this button to

select the device connected to the 8-Channel Direct

Inputs

. (See page 34 for more information.)

SPL Select Button: This button activates the

EzSet function to quickly and accurately calibrate the

AVR 7300’s output levels. When the button is

pressed, you will then need to select between auto-

matic EzSet operation or using the remote as a manu-

al SPL meter by pressing the

⁄

Navigation

Button o until your choice appears in the remote’s

LCD display. Press the Set Button q to enter the

setting, and then follow the instructions as displayed

in the LCD display. (For complete information, see

page 29.)

EzSet Microphone Sensor: The microphone

sensor that is used by the EzSet system is behind the

three slots at the top of the remote control. When

using EzSet to calibrate the AVR 7300, be certain that

the slots are not covered. (See page 29 for more

information on using EzSet.)

Lens: The infrared emitters behind the plastic

lens at the top of the remote communicate the remote

codes to the AVR 7300. Be certain that the lens is not

covered when using the remote, and point the lens

toward the AVR for best results. In learning mode, the

remote receives IR codes to be learned through a

sensor behind the lens.

NOTE: DO NOT remove the rubber plug that is supplied

to cover the jack on the upper right side of the remote.

The jack is not active and is reserved for future use.

16 MAIN REMOTE CONTROL FUNCTIONS

AVR7300(120v)-OM 6/14/04 9:15 AM Page 16

Harman Kardon AVR7300 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info