Bedienungsanleitung Harman Kardon AVR85 (Seite 34 von 40) (Englisch)

502655

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Advanced Features

AVR85 120 rev (g) 6/14/97

MODE

DOLBY DIGITAL

DOLBY PRO LOGIC

DOLBY 3 STEREO

MOVIE SURROUND

HALL SURROUND

MATRIX SURROUND

STEREO

FEATURES

This mode is used only when the source material is encoded with Dolby Digital (AC-3)

data. It provides up to five separate main audio channels and a special dedicated Low-

Frequency Effects channel. Use this mode with DVD, LV or HDTV sources.

Dolby Pro Logic is the standard mode for surround sound decoding. It uses

information encoded in a two-channel stereo recording to produce four distinct

channels: Left, Center, Right and Surround. Use this mode for accurate reproduction

of programs bearing the Dolby Surround, DTS Stereo, UltraStereo or other

“Surround” logos. Surround encoded programs include videocassette, DVD and LD

movies, TV and cable programs, radio programs and audio CDs. Dolby Pro Logic

processing may also be used to provide a pleasing surround effect with some

stereophonic source material that does not carry surround encoding.

Dolby 3 Stereo uses the information contained in a surround encoded or two-channel

stereo program to create center channel information. In addition, the information

that is normally sent to the rear channel surround speakers is carefully mixed in with

the front left and right channels for increased realism. Use this mode when you have a

center channel speaker, but no surround speakers.

Movie Surround processing uses matrix surround decoding, with the option to extend

the delay time to 90 ms. Use this to experiment with surround times above 30 ms, or if

the delay time formula suggests a longer time delay for your room.

This mode is designed for use with stereo recordings. It provides a sound-field effect

that simulates the complex combination of direct and reflected sounds that create

the rich reverberant atmosphere of a medium-sized circular concert hall.

This mode is designed for use with sports broadcasts, live concerts or other programs

where the feeling of a wide surround effect is desired.

This mode turns off all surround processing and presents the pure left and right

channel presentation of two channel stereo programs.

DELAY TIME RANGE

Center: 0 ms – 5 ms

Surround: 0 ms –15 ms

15 ms – 30 ms

Initial Setting = 20 ms

No Surround Channels

40 ms – 90 ms

Initial Setting = 40 ms

40 ms – 90 ms

Initial Setting = 40 ms

40 ms – 90 ms

Initial Setting = 40 ms

No Surround Channels

Surround Mode Chart

The first time a PCM source is played the

AVR85 will automatically select the

Stereo mode, but you may then select

any surround mode desired.

Recording When Digital Sources

Are In Use

Since the record outputs of the AVR85

are traditional two-channel stereo, the

multichannel outputs of a Dolby Digital

signal are not available for recording.

When a Dolby Digital signal is being

played, the accompanying analog audio

signal is sent to the Tape Out and VCR

Out jacks £∞fj. The video source

being output is the last selected video

input shown in the Visual indicator Q.

AVR85 om (g) 9/16/98 11:21 AM Page 31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR85 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info