Bedienungsanleitung Harman Kardon BDS 2 (Seite 3 von 38) (Englisch)

456589

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

BDS

ENGLISH

Verify Line Voltage Before Using, Unpacking, Installation Location,

Cleaning, Moving the Receiver and Introduction

Introduction

Please register your product on our Web site at www.harmankardon.com.

Note: You’ll need the product’s serial number. At the same time, you can choose to be

notified about our new products and/or special promotions.

Thank You for Choosing Harman Kardon® Products!

In the years since harman kardon engineers invented the high-fidelity receiver, we have

taken to heart this philosophy: Bringing the joy of home entertainment to as many people

as possible, adding performance and ease-of-use features that enhance the experience. The

BDS series of home entertainment systems offers a complete home entertainment solution

with a wealth of listening and viewing options in one sleek receiver. Each BDS series system

also includes a 5.1-channel, 2.1-channel or soundbar loudspeaker system, a system remote

control and all the cables and accessories you need to enjoy movies and music in your own

home, when you use them with your television or video display.

To get the maximum enjoyment from your new BDS system, we urge you to read this manual

thoroughly and refer back to it as you become more familiar with your new system’s features

and their operation.

If you have any questions about this product, its installation or its operation, please contact

your retailer or custom installer, or visit the Harman Kardon Web site at

www.harmankardon.com.

Verify Line Voltage Before Using

Your BDS receiver has been designed for use with 110 – 240-volt, 50Hz/60Hz AC current. Your

subwoofer has been designed for use with either 120-volt, 60Hz or 220 – 240-volt, 50/60Hz

AC current, depending on where your system was sold. The receiver includes a detachable IEC

power cable designed for use in the region where the system is sold.

Connection to a line voltage other than that for which the units are intended can create

a safety and fire hazard and may damage the units. If you have any questions about the

voltage requirements for your specific model or about the line voltage in your area, contact

your dealer before plugging the unit into a wall outlet.

Unpacking

The carton and shipping materials used to protect your new receiver during shipment were

specially designed to cushion it from shock and vibration. We suggest that you save the

carton and packing materials for use in shipping if you move or if the unit ever needs repair.

To minimize the size of the carton in storage, you may wish to flatten it. You can do it by

carefully slitting the tape seams on the carton’s bottom and collapsing it. You can store

cardboard inserts in the same manner. Packing materials that cannot be collapsed should be

saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and other

sections of the shipping-protection materials are recyclable. Please respect the environment

and discard those materials at a local recycling center.

Remove the protective plastic film from the front-panel lens. Leaving the film in place will

affect the performance of your remote control.

Installation Location

To ensure proper operation and to avoid the potential for safety hazards, place the unit

•

on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and

any mounting hardware can support the weight of the product.

Provide proper space both above and below the unit for ventilation. If this product will

•

be installed in a cabinet or other enclosed area, make certain that there is sufficient air

movement within the area. Under some circumstances, a fan may be required.

Do not place the unit directly on a carpeted surface.

•

Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct

•

sunlight or heating equipment.

Avoid moist or humid locations.

•

Do not obstruct the ventilation slots on the top and sides of the unit or place objects

•

directly over or next to them.

Do not place the

•

receiver directly on top of a product that generates excessive heat.

Due to the heat generated by the

•

receiver and other components in your system, there is

the remote possibility that the rubber padding on the bottom of the unit’s feet may leave

marks on certain wood or wood-veneer materials. Use caution when placing the unit

on soft woods or other materials that heat or heavy objects may damage. Some surface

finishes may be particularly sensitive to absorbing such marks, due to a variety of factors

beyond harman kardon control, including the nature of the finish, cleaning materials

used, normal heat and vibration caused by the use of the product, or other factors. Your

warranty will not cover this type of damage to furniture, so exercise caution in choosing

an installation location for the component and in performing normal maintenance

practices.

Your new

•

harman kardon Blu-ray Disc™ player requires a broadband Internet connection

for BD-Live™ interactivity.

Cleaning

receiver

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only after

unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy water,

then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth. NEVER use

benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use

abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide

near the unit.

Speakers and Subwoofer

When needed, use a soft cloth to remove any fingerprints or dust from the enclosures or

grilles. NOTE: Do not use any cleaning products or polishes on the enclosures or grilles.

Moving the Receiver

Before moving the receiver, disconnect any interconnection cords to other components, and

disconnect the unit from its AC outlet.

NOTE: The built-in Blu-ray Disc/DVD player in your BDS receiver is designed and

manufactured for compatibility with region management information that is encoded on

most Blu-ray Disc recordings and DVD recordings:

BDS receivers sold in the USA

•

are designed only for playback of discs with Blu-

Ray Disc Region Code A and DVD Region Code 1 information, or for discs that do not

contain any region code information.

BDS receivers sold in Europe

•

are designed only for playback of discs with Blu-ray

Disc Region Code B and DVD Region Code 2 information, or for discs that do not

contain region code information.

If there is a Region Code on a disc other than the one your BDS player is designed for, it

will not play in your BDS receiver.

Harman Kardon BDS 2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info