Bedienungsanleitung Harman Kardon BDS 277 (Seite 5 von 38) (Englisch)

502834

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

BDS Receiver Front-Panel Controls

Eject button (appears only when a disc has been inserted): Touch this button to

eject a disc from the BDS receiver’s built-in disc player. Before touching this button,

make sure no objects are blocking the disc-slot opening. NOTE: If you do not remove

the ejected disc within 30 seconds, it will automatically re-load back into the disc

player for protection.

Disc slot: Insert a compatible disc into the slot. The BDS receiver’s disc player will

accept 5-inch (12cm) and 3-inch (8cm) discs.

Information display: Various messages appear on this display in response to

commands and in order to show the audio/video that is playing, the BDS receiver’s

settings or other aspects of the BDS receiver’s status as described throughout this

manual.

On/Standby indicator: This LED surrounds the Volume control. When the BDS

receiver is plugged into AC power and its rear-panel Main Power switch is in the On

position, the LED turns amber to indicate that the receiver is in Standby mode (ready

to be turned on). When you turn the BDS receiver on the LED turns white.

Headphone jack: Insert the 1/8-inch (3.5mm) stereo mini connector from a set

of headphones into this jack. NOTE: When a plug is inserted into the Headphone

jack, the BDS receiver’s speaker outputs automatically mute; the HDMI audio output

remains active.

USB port: You can use the USB port to play audio ﬁles from an Apple iOS

device

connected to the port, and to play MP3 and WMA audio ﬁles and show video and

picture ﬁles from a USB device inserted into the port. Insert the connector or device

into the USB port oriented so it ﬁts all the way into the port. You may insert or remove

the connector or device at any time - there is no installation or ejection procedure.

You can also use the USB port to perform ﬁrmware upgrades. If an upgrade for the

BDS operating system is released in the future, you will be able to download it to

the BDS receiver using this port. Complete instructions will be provided at that time.

IMPORTANT: Do not connect a PC or other USB host/controller to this port, or

you may damage both the BDS receiver and the other device.

Volume control, Power button, On/Standby indicator: The BDS receiver has four

different power modes:

• Off (On/Standby indicator not illuminated): When the rear-panel Main Power switch

is in the Off position or the power cord is unplugged the BDS receiver is off and

will not respond to any commands. Plugging the power cord into a live AC outlet

and setting the Main Power switch in the On position will put the receiver into the

Standby mode.

• Standby (Power indicator glows solid amber): The Standby mode minimizes energy

consumption when you’re not using the BDS receiver. When the receiver is in

Standby, it will not automatically turn on or play audio in response to a signal from

an AirPlay device (BDS 277/BDS 577 only) or a Bluetooth device. When the receiver

is in Standby, pressing the Power button turns it on. To put the receiver into Standby

when it is on, press the Power button for more than two seconds. NOTE: To conserve

energy you can have the receiver automatically enter the Standby mode whenever

no control buttons have been pressed and no audio signal has been present for 15

minutes. See General Settings, Auto Standby/Standby Mode, on page 16.

• Sleep (Power indicator glows solid amber): The Sleep mode mutes the BDS

receiver’s outputs and shuts off its OSD and front-panel display, but allows the

receiver to automatically turn on and play audio in response to a signal from an

AirPlay device (BDS 277/BDS 577 only) or a Bluetooth device. See Listening to Media

via AirPlay, on page 25, for more information. When the receiver is in Sleep, pressing

the Power button turns it on. To put the receiver into Sleep when it is on, press the

Power button momentarily.

• On (Power indicator glows solid white): When the BDS receiver is on it is fully

operational.

IMPORTANT: Do not turn the receiver’s Volume control up to or past the point where

the audio from the speakers becomes distorted. Doing so can damage the speakers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 277 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 277

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info