Bedienungsanleitung Harman Kardon BDS 277 (Seite 13 von 38) (Englisch)

502834

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

BDS

Connections and

Preparing the Remote Control

Connect the Remote IR Input

The BDS receiver is equipped with a Remote IR Input connector that lets you remotely

control the receiver when you place it inside a cabinet or in a location that is out of the

line of sight of the remote control. Connect an external IR receiver, such as the optional

Harman Kardon HE 1000, to the receiver’s Remote IR Input connector.

BDS Receiver

Remote IR

In Connector

External IR

Receiver

BDS Receiver Installed

Inside of Cabinet

Connecting the AC Power

The BDS receiver comes with a detachable AC power cord. This type of cord makes it

easier for you to install and connect all other system wiring to the receiver’s rear panel.

NOTES:

• The power requirement for the BDS receiver is 100V – 240V AC, 50/60Hz, 120W

(BDS 575/BDS 577) or 90W (BDS 275/BDS 277). Connecting to a power source other

than the ones listed may damage the receiver or cause abnormal operation.

• Before connecting the AC power cord to a wall outlet, conﬁrm that you have correctly

made all of the speaker connections, video connections and audio-component

connections.

Connect the female end of the receiver’s detachable power cord to the receiver’s AC

Power connector. Plug the other end into a working, unswitched AC outlet.

Power Cord

(supplied)

Set the receiver’s Main Power switch to the “On” position. The receiver’s On/Standby

indicator will turn amber, indicating that the receiver is in the Standby mode.

Preparing the Remote Control

Installing the Batteries

Your receiver’s remote control uses three AAA batteries (supplied). Insert the batteries as

shown in the illustration, making sure to observe the correct polarity.

Using the Remote

When using the remote, remember to aim it toward the receiver’s front panel. Make

sure that no objects, such as furniture, block the remote’s view of the receiver. Bright

lights, ﬂuorescent lights, and plasma-video displays may interfere with the function of

the remote.

• The remote has a range of about 20 feet (6.1m), depending on the lighting conditions.

• You can use the remote at an angle of up to 30° to either side of the BDS receiver.

If the remote seems to operate intermittently, or if pressing a button on the remote does

not cause one of the Input buttons to light up, make sure that the batteries are inserted

correctly. If the remote still operates intermittently, replace all three batteries with new

ones.

Programming the Remote Control

In addition to controlling the BDS receiver, you can program the unit’s remote to control

one auxiliary (Aux) component. The remote is also capable of learning codes directly from

other remotes. This ability allows you to combine learned commands with programmed

codes, making the remote capable of controlling more than one Aux component. Typical

Aux components would be your TV, a satellite receiver or a cable receiver. The remote

will control the Aux component(s) only when the Aux source button has been pressed.

Pressing any other source button will put the remote back into the normal BDS receiver

control mode.

To Program the Remote to Control an Aux Component:

1. Look up the set-up codes for the component type (for example, TV or cable box)

and its brand in the Aux Component Remote-Control Code List, starting on page 29.

2. Turn on your auxiliary component.

3. Press and hold the Aux button for three seconds, and then release it.

NOTE: The remote will remain in the programming mode for 20 seconds; you must

perform Step 4 within that time period.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 277 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 277

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info