Bedienungsanleitung Harman Kardon BDS 330 - SET (Seite 17 von 34) (Englisch)

537903

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

ENglIsh

Setting Up the Receiver

Display Settings

Select to adjust display settings

Video Processing

Aspect Ratio

Resolution

Color Space

Film Mode

HDMI Deep Color

16:9 Full

Auto

RGB

Off

Display Settings

TV: This option allows you to set the following display parameters:

Aspect Ratio: This option lets you select how you want 4:3 programs displayed on a

16:9 TV, or 16:9 programs displayed on a 4:3 TV. “16:9 Full” stretches 4:3 material

to ﬁll a 16:9 TV screen. “16:9 Normal” displays 4:3 material on a 16:9 TV with black

boxes on either side of the picture, preserving the program’s original visual composition

without distortion. “4:3 Pan & Scan” zooms in on widescreen material to ﬁll a 4:3 screen.

“4:3 Letterbox” displays 16:9 material with black bars above and below the picture,

preserving the program’s original visual composition without distortion.

Resolution: This option lets you select your TV’s highest resolution. “Auto” automatically

selects the best resolution for your TV.

Color Space: This option lets you match the BDS receiver’s video output to the color

space of the connected TV or video display. Check the documentation for your TV or

video display to determine the color space it uses.

Film Mode: If your TV can handle a 1080p 24Hz signal (if it has 1080 resolution and

a video-refresh rate that is a whole-number multiple of 24), set Film Mode to “On” to

get maximum resolution from Blu-ray Disc content mastered at 24 frames per second.

If your display cannot handle a 1080p/24Hz signal, set this option to “Off,” and the

BDS receiver will upconvert 24-frame-per-second ﬁlm material to the standard video

30Hz refresh rate.

HDMI Deep Color: This option allows you to adjust the resolution of color output to your

TV. If your TV accepts Deep Color, this option allows your TV to display an enhanced

color palette.

• On: The BDS receiver outputs 36-bit Deep Color if your TV supports it. If your TV does

not, the receiver will output 30-bit color.

• Off: The BDS receiver does not output Deep Color (color resolution remains at 24 bits).

TV Standard: This option allows you to set the BDS receiver to match your area’s

television standard. Select NTSC for the USA or PAL for Europe. Select “Auto” to allow

the receiver to match the standard of the connected TV automatically.

NOTE: If you use the “Auto” setting, the receiver may skip the ﬁrst two seconds of PAL

DivX content while it switches to the PAL mode. To avoid this, use the PAL setting.

HDMI 3D: This option lets you determine how the BDS receiver will handle HDMI 3-D

content. If you have connected the receiver to a 3-D capable TV, select “Auto” to allow

the receiver to play 3-D content in 3-D automatically. If you have connected the receiver

to a TV that is not 3-D capable, select “Off” to play 3-D content in 2-D.

Video Processing: This option allows you to set the BDS receiver’s internal video

processing.

Video Mode: This setting lets you select a preset video-processing option to optimize

the picture for the current program by adjusting the brightness, contrast, color and

sharpness:

• Standard: Neutral control settings.

• Vivid: For video games.

• Cinema: For movies and many television broadcasts.

• Custom: This option lets you adjust the picture settings manually. The Brightness,

Saturation (color saturation), Hue, Contrast, Sharpness and CTI settings appear

as sliders. The default setting for each adjustment is 0. Use the Cursor Left/Right

buttons to change each setting’s value.

Audio Settings

Select to adjust Bass & Treble

Tone Controls

Audio Output

Speaker Settings

Bass

Treble

0dB

Audio Settings

Tone controls: This option lets you increase or decrease the amount of bass (low

frequencies) and treble (high frequencies) in the sound. The adjustment ranges from

–10dB to +10dB, in 1dB increments.

Audio output: This option lets you set the following items:

HDMI Audio Out: In addition to digital video signals, the BDS receiver’s HDMI connection

also carries digital audio signals.

• PCM: This option outputs a two-channel downmix derived from the program’s

native audio format via the HDMI output.

• Off: This option turns the receiver’s HDMI audio output off. We recommend setting

this option to “Off,” so you can take full advantage of the superior audio capability

of your BDS receiver.

Dynamic Range Control: This setting makes the loud and quiet parts of a movie or music

closer to the same volume (a process known as compression). Compression lets you

turn up the volume so you can hear the quiet parts without the loud parts disturbing

other people. NOTE: This feature works only with Dolby Digital programs that have been

specially encoded. Three settings are available:

• Off: Never applies compression. Use this setting when the volume may be as loud

as you desire.

• On: Always applies compression. Use this setting when you want the volume to be

as quiet as possible without making it difﬁcult to hear spoken dialogue.

• Auto: Applies compression based on information encoded in the Dolby Digital

bitstream. The receiver will selectively apply compression only during the most

dynamic parts of the soundtrack.

Speaker Settings: This option allows you to set up the receiver to work properly with

your speakers. There are two options:

• EzSet/EQ: This option makes the supplied EzSet/EQ microphone automatically

detect the capabilities of each connected speaker and optimize the BDS receiver’s

performance for your speakers. This will provide excellent results in most

installations.

• Manual Conﬁguration: This option lets you manually conﬁgure the BDS receiver to

work with your speakers. Select this option if you wish to set up the receiver for

your speakers manually or if you are unable to run EzSet/EQ calibration.

With both options, the ﬁrst step is to select the conﬁguration of your speaker system:

• 2.0: This conﬁguration consists of left and right main speakers but no subwoofer.

Selecting this conﬁguration sends all of the bass to the left and right speakers, so

be sure that they are full-range and can handle deep bass.

• 2.1: This conﬁguration consists of left and right main speakers, plus a subwoofer.

• 3.1: This conﬁguration consists of front left, center and front right speakers, plus

a subwoofer.

• 5.1: This conﬁguration consists of front left, front right, center, surround left and

surround right speakers, plus a subwoofer.

BDS 270/BDS 570

Harman Kardon BDS 330 - SET Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 330 - SET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info