Bedienungsanleitung Harman Kardon BDS 380 (Seite 5 von 33) (Englisch)

531039

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Installation Location

BDS 280/580

Moving the System

Before moving the system, first disconnect it from the AC power and then remove the

interconnection cables to other components.

Cleaning

When the system gets dirty, wipe it with a clean, soft, dry cloth. After unplugging the

AC power cord, Wipe it with a soft cloth dampened with mild soapy water, then a fresh

cloth with clean water. Wipe it dry immediately with a dry cloth.

IMPORTANT: NEVER use benzene, aerosol cleaners, thinner, alcohol or any

other volatile cleaning agent.

NOTE: Do not use abrasive cleaners as they may damage the finish of metal

parts in the BDS system. Avoid spraying insecticide near the unit.

BDS Front Panel Controls and Connections

1. Disc slot

2. Headphone output and EzSet/EQ microphone input

3. USB/iPad/iPod/iPhone input

4. Volume ring and power button

5. NFC for Bluetooth pairing

6. Eject

7. Information display

1. Disc slot: Insert a compatible disc into the slot. The BDS system’s disc slot accepts

5-inch (12 cm) and 3-inch (8 cm) discs.

2. Headphone output and EzSet/EQ microphone input: Insert the 1/8-inch

(3.5 mm) stereo mini connector from a set of headphones into this jack. When

performing EzSet/EQ speaker calibration, insert the microphone here.

NOTE: When a plug is inserted into the headphone jack, the BDS system’s

speaker output automatically becomes mute; the HDMI audio output

remains active.

3. USB/iPad/iPod/iPhone input: You can use the USB port to play audio files from

an Apple iOS device connected to the port, and to play audio files and show video and

picture files from a USB device inserted into the port. Insert the connector or device

into the USB port oriented so it fits all the way into the port. You may insert or remove

the connector or device at any time - there is no installation or ejection procedure. You

can also use the USB port to perform firmware upgrades. If an upgrade for the BDS

operating system is released in future, you will be able to download it to the BDS system

using this port. Complete instructions will be provided at that time.

IMPORTANT: Do not connect a PC or other USB host/controller to this port as

it may damage both the BDS system and the other device.

NOTE: This USB port is rated for 2.1A output, which suggests, it is certified

to charge iPad devices (as well as iPhone and iPod devices). There is a USB

connector on the rear panel as well with similar functionality, rated for

500mA to charge iPhone and iPod devices.

4. Volume ring and power button: Volume can be adjusted by touching this

capacitive ring. Slide clockwise around the ring to increase volume, counter-clockwise

to decrease volume.

IMPORTANT: If the audio from the speakers begins to distort at high volume

levels, reduce the volume as prolonged distortion can damage the system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 380 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info