Bedienungsanleitung Harman Kardon BDS 400 Systeem (Seite 17 von 38) (Englisch)

658950

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

BDS

ENGLISH

Connections

Connecting Audio Sources

Tape Deck

-OR-

To Audio

Output

To Play Output

To Coaxial Output

To Optical

Output

To Optical Output

Cable/Satellite Tuner

Digital Audio Source

Analog Audio Inputs 1 and 2: If you have an audio-only analog source component (such

as a tape deck), connect its left and right analog outputs to the Analog Audio Input 1 or

Analog Audio Input 2 jacks as shown in the illustration.

NOTE: To hear a TV show through your BDS system, you need to connect the audio output of

your TV to the BDS receiver. If your TV has a digital-audio output, you can connect it to one of

the BDS receiver’s digital inputs (see below). If your TV does not have a digital-audio output,

you will need to connect the TV’s analog-audio output to the BDS receiver’s Analog Audio

Input 1 or Analog Audio Input 2 jacks.

Coaxial In and Optical 1/Optical 2 In: If you have an audio-only digital source

component (such as a CD changer or video game), you can connect it to one of these inputs,

as shown in the illustration. When using the Optical 1 and Optical 2 digital connections,

gently push the cable connector through the panel connector’s built-in shutter until it is

firmly seated in the connector.

NOTE: Use only one type of digital connection for each source component.

Connecting to a Local Area Network (LAN)

Use a CAT. 5/RJ45 network cable (not supplied) to connect the BDS receiver’s BD-Live

connector directly to a network router, a network switch, a network modem or an Ethernet

network wall jack that has Internet access.

NOTE: The BDS receiver can not access content on other networked devices. The Network

connection enables only the receiver’s BD-Live features. See BD-Live Interactivity, on page 26,

for details.

Network Modem

Cat. 5/5E

To Internet

Connecting the AC Power

The BDS receiver comes with a detachable AC power cord. This type of cord makes it easier for

you to install and connect all other system wiring to the receiver’s rear panel. The subwoofer

has a non-detachable power cord.

NOTES:

The power requirement for the

•

BDS receiver is 110V – 240V AC, 50/60Hz, 110W (BDS 5

receiver) or 70W (BDS 2 receiver). The power requirement for the subwoofer is 110V –

120V AC, 60Hz, 200W (USA) or 220V – 240V AC, 50/60Hz, 200W (EU). Connecting to a

power source other than the ones listed may damage the receiver or subwoofer, or cause

abnormal operation.

Before connecting the AC power cords to wall outlets, confirm that you have correctly

•

made all of the speaker connections, video connections and audio-component

connections.

Connect the female end of the receiver’s detachable power cord to the receiver’s AC Power

Input connector. Plug the other end into a working, unswitched AC outlet. Plug the

subwoofer’s power cord into a working, unswitched AC outlet as well.

PL0004-01001

Receiver

110V – 240V, 50Hz/60Hz

Subwoofer

USA: 120V, 60Hz

EU: 220V – 230V, 50Hz/60Hz

Set the receiver’s and subwoofer’s Main Power switches in the “On” position. The receiver’s

Power indicator will turn amber, indicating that the receiver is in the Standby mode.

The subwoofer’s LED will not light up until it receives a turn-on signal. See

•

Subwoofer

Controls and Connections, on page 7, for details.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 400 Systeem Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 400 Systeem

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info