530557
12
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
BDS 280/580
12
Preparing the Remote Control
NOTE: iOS version 5 or higher is required for iOS Wi-Fi sharing.
1. Select Configure Wi-Fi by iOS from the Setup Wi-Fi list.
A pop-up will be displayed on your iOS device.
2. Select Allow to confirm that you want to share your Wi-Fi settings.
3. The connection should now be established automatically.
Check the status on your TV for confirmation
WPS PBC (Push Button Control)
1. Select WPS PBC from the Setup Wi-Fi list.
2. Press the WPS button on the rear panel of the BDS.
3. Next go to your wireless router and press its WPS button.
4. The connection should now be established automatically
Check the status on your TV for confirmation.
WPS PIN
1. Select WPS PIN from the Setup Wi-Fi list.
A PIN code is displayed on the screen.
2. Enter this same PIN on your wireless router’s internal web page
to connect. See your router’s user manual for more details.
Preparing the Remote Control
Installing the Batteries
Your system’s remote control uses three AAA batteries (supplied). Insert the batteries as
shown in the illustration, making sure to observe the correct polarity.
Using the Remote Control
When using the remote control, remember to aim it towards the systems front panel.
Make sure that no objects, such as furniture, block the remotes view of the system.
Bright lights, fluorescent lights, and plasma-video displays may interfere with the
function of the remote.
The remote control has a range of about 20 feet (6.1m), depending on the
lighting conditions.
You can use the remote at an angle of up to 30° to either side of the BDS
system.
If the remote seems to operate intermittently, or if pressing a button on the remote
does not cause the remote control backlights to light up, make sure that the batteries
are inserted correctly. If the remote still operates intermittently, replace all three
batteries with new ones.
Programming the Remote Control
In addition to controlling the BDS system, you can program the unit’s remote to
control one auxiliary (aux) component. The remote is also capable of learning codes
directly from other remotes. This ability allows you to combine learned commands
with programmed codes, making the remote capable of controlling more than one
aux component. Typical aux components would be your TV, a satellite system or a cable
system. The remote will control the aux component(s) only when the aux source button
has been pressed. Pressing any other source button will put the remote back into the
normal BDS system control mode.
To Program the Remote to Control an Aux Component:
1. Check the set-up codes for the component type (for example,
TV or cable box) and its brand in the Aux Component
Remote-Control Code List, starting on page 23.
Wireless router
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

harman-kardon-bds-480

Suche zurücksetzen

  • Lautsprecher für Empfang aus dem Fernseher verbinden? Eingereicht am 12-2-2018 12:38

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon BDS 480 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Harman Kardon BDS 480

Harman Kardon BDS 480 Bedienungsanleitung - Deutsch - 33 seiten

Harman Kardon BDS 480 Bedienungsanleitung - Holländisch - 33 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info