Bedienungsanleitung Harman Kardon BDS 680 - SET (Seite 4 von 33) (Englisch)

537902

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

BDS 280/580

Installation Location

• One EzSet/EQ™ Microphone

• Two Wi-Fi Antennas

• One HDMI Cable

• Three AAA Batteries

NOTE: If any of the listed items are missing, please contact Harman Kardon

customer service at www.harmankardon.com

Installation Location

• To ensure proper operation and to avoid the potential for safety hazards,

place the unit on a firm and level surface. When placing the unit on a shelf,

be certain that the shelf and any mounting hardware can support the

weight of the product.

• Provide adequate space behind the system for ventilation. If the product

will be installed in a cabinet or other enclosed area, make sure there is suf-

ficient air movement within the area.

• Do not place the unit directly on a carpeted surface.

• Avoid installation in extremely hot or cold locations or in an area that is

exposed to direct sunlight or heating equipment.

• Avoid moist or humid locations.

• Do not obstruct the fan vents on the rear panel or ventilation slots on the

sides of the unit or place objects directly over or next to them.

• Do not place the system directly on top of a product that generates

excessive heat.

• Due to the heat generated by the system, there is a remote possibility that

the padding on the bottom of the system may leave marks on certain wood

or wood-veneer materials. Use caution when placing the system on soft

woods or other materials that heat or heavy objects may damage. Some

surface finishes may be particularly sensitive to absorbing such marks,

due to a variety of factors beyond Harman Kardon’s control, including the

nature of the finish, cleaning materials used, normal heat and vibration

caused by the use of the product, or other factors. Your warranty will not

cover this type of damage to furniture, so exercise caution in choosing

an installation location for the component and in performing normal

maintenance practices.

• The BDS system requires either a Wi-Fi home network signal or access to

a physical Ethernet connection to access certain features such as Apple

AirPlay®, DLNA®, control from the Harman Kardon Remote app, and

streaming Internet services.

Verify Line Voltage before Using

Your BDS system has been designed to be used with 100 – 240 Volt, 50 Hz/60Hz AC

current and includes a detachable IEC power cable intended for use in the region where

the system is sold. Connection to a line voltage other than that for which the unit is

intended can create a safety and fire hazard and may damage the unit. If you have any

questions about the voltage requirements for your specific model or about the line

voltage in your area, contact your dealer before plugging the unit into a wall outlet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 680 - SET Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 680 - SET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info