Bedienungsanleitung Harman Kardon BDS 680 - SET (Seite 15 von 33) (Englisch)

537902

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Setting up the System

BDS 280/580

Erasing a Learned Code and Restoring the Original Button Code

1. Press and simultaneously hold down the Aux and Bookmark (green)

buttons on the BDS remote control for at least three seconds. The BDS

remote will enter the learning mode after the Aux button LED turns on.

2. Press and release the remote control button that you want

to erase. The aux button’s LED will flash three times.

3. To erase other buttons, press the selected buttons.

4. To exit the erase mode, press aux button.

Resetting the Remote to Factory Default Condition

1. Press and simultaneously hold down the Aux and Thumbnail (yellow)

buttons on the BDS remote control for at least three seconds.

2. The Aux LED will flash three times and exit learn-erase mode.

NOTE:

• By erasing all learned codes, all of the BDS remote buttons will

return to their original functions.

• To program the remote control for TV device, please use the TV

button instead of AUX button.

Controlling an Apple TV

If you have connected an apple TV to the BDS system’s HDMI 3 input, you can also use

the BDS remote to control an apple TV that is streaming audio and video files stored on

your home network, or accessing media from an Internet service such as Netflix.

Select any other input source to return the BDS remote to its normal operation.

NOTE: To program the remote control for TV device, please use the TV button

instead of AUX button.

Using the Remote after it is Programmed

Pressing the remote’s Aux Input button will put the remote into the auxiliary-

control mode, and it will control the auxiliary component(s) via the codes you have

programmed into it.

If you have programed a TV with TV button, you can press remoter’s TV button to put

the remote into TV control mode and it will control the TV via the codes you have

programmed into it.

To switch the remote back to the BDS system-control mode from the auxiliary-control

mode, press any of the other Input buttons or the Home button.

Setting up the System

To set up your BDS system, you will use the remote to navigate through all of the

onscreen menus and to make selections from them.

• Use the Cursor Up/Down buttons to navigate through the menu list.

• To select a highlighted item, press the OK button. The screen will change

depending on your selection.

• To return to the previous screen, press the back button

NOTE: BDSx80 CR3 software will have advanced intial setup, which means

the setup procedure will be different with current one at that time.

1. When you turn on your BDS system for the first time, the on-

screen menu will show the Initial Setup screens. The first

screen allows you to select the language you want to use.

2. Press OK, and the initial setup Resolution screen will be displayed.

3. Highlight your choice and press OK. Next, the initial setup Aspect Ratio

screen will appear. 16:9 Full is the best choice for most displays.

4. Highlight your choice and press the OK button. Setup is complete. Press

OK once more to finish Initial Setup and show the home menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 680 - SET Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 680 - SET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info