Bedienungsanleitung Harman Kardon BDS 776 - SET (Seite 15 von 34) (Englisch)

537906

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

ENglIsh

Programming Remote Control “Punch-Through” Commands

After programming the remote to control an auxiliary (Aux) component, you can also

program it so it will control the Aux component’s channel up/down and transport

functions (Play, Pause, etc.) even when the remote is not in the Aux-control mode. For

example, if the remote is programmed to operate your TV in the Aux control mode, you

can also have the TV’s channel +/– functions “punch through” and operate even when

the remote is in the Disc, Radio or iPod control modes.

1. Press and hold the Input button for the main device the remote will be operating. The

button will light up, go dark and then light up again. Release the button.

2. Select the type of punch-through programming.

a) For “punch-through” channel control, press the Channel Up button.

b) For “punch-through” transport control, press the Play button.

3. Press the Aux button. The original Input button will ﬂash to conﬁrm.

You can repeat Step 1 – Step 3 for any of the remote’s Input buttons (Aux, Radio, etc.).

NOTE: “Punch-through” channel and transport commands will override the existing

commands for those buttons in the source modes you program.

To undo “punch-through” programming, follow the same steps as above, but press the

same Input button in Step 1 and Step 3.

Erasing All Learned Button Codes

1. Press and hold the Options button for more than three seconds. The remote’s Aux

Input button will light up.

2. Press the Aux Input button. The button will ﬂash.

3. Hold down the “9” number button for at least three seconds, three times in a row.

The Aux Input button will ﬂash three times then will go out. All learned button codes

have now been erased.

Resetting the Remote to Factory Default Condition

1. Press the Aux Input button and the “0” number button simultaneously. The Aux

button will light up.

2. Hold down the “3” number button for at least three seconds, three times in a row. All

of the input buttons will ﬂash three times.

3. After the input buttons stop ﬂashing, all remote programming has been erased and

the remote is reset to its factory default programming.

Using the Remote After it is Programmed

Pressing the remote’s Aux Input button will put the remote into the auxiliary-control

mode, and it will control the auxiliary component(s) via the codes you have programmed

into it.

To switch the remote back to the BDS receiver-control mode from the auxiliary-control

mode, press any of the other Input buttons or the Home button.

Setting Up the Receiver

NOTE: The menu screens shown in this manual are for illustrative purposes and may

differ somewhat from the actual displays.

To set up your BDS receiver, you will use the remote to navigate through all of the on-

screen menus and to make selections from them.

• Use the Cursor Up/Down buttons to navigate through the menu list. When an item is

highlighted, a blue border will appear around it.

• To select a highlighted item, press the OK button. The screen will change depending

on your selection.

• To return to the previous screen, press the Previous button.

Setup Wizard

When you turn your BDS receiver on for the ﬁrst time, the on-screen menu will display

the Setup Wizard.

Setup Wizard Page: 1/5

Welcome to the Harman/Kardon BDS Setup

Wizard.

Some simple information is needed to ensure

you get the best experience from your product.

You can adjust these settings later in addition

to making changes to more advanced settings

by selecting ‘Settings’ from the Home Menu.

Before you can use your BDS receiver, you need to set the language and make a few

basic settings so that its video output will work properly with your TV. Press the OK

button and the Wizard’s language screen will appear.

Setup Wizard

Page: 2/5

Please select which language you would like

the BDS menus to appear in.

English

Español

Français

Deutsch

Italiano

After setting the language you want the on-screen menus to appear in, press the OK

button and the Wizard’s TV-resolution screen will appear.

Setup Wizard

Page: 3/5

Please select the highest resolution that your TV

supports. If you are unsure, select ‘Auto’.

Upon making a selection the screen will be

changed to the chosen resolution. You will be

presented with the option to continue with the new

resolution or ‘Cancel’ to return to the previous

resolution. If the screen remains blank, please wait

15 seconds without pressing anything and the

system will automatically return to the previous

resolution.

Auto

480p/576p

720p

1080i

1080p

Preparing the Remote Control and

Setting Up the Receiver

BDS 270/BDS 570

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 776 - SET Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 776 - SET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info