Bedienungsanleitung Harman Kardon BDS 776 - SET (Seite 18 von 34) (Englisch)

537906

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Setting Up the Receiver

EZ Set/EQ: The BDS receiver’s EZSet/EQ™ system uses the supplied EzSet/EQ

microphone to perform this important step automatically. Before beginning, be sure you

have correctly connected your speakers to the BDS receiver. IMPORTANT: Press the

remote’s “Disc” input button before performing the EZ Set/EQ procedure. The EZ

Set/EQ procedure is only available when the Disc input is selected.

1. Plug the supplied EzSet/EQ microphone into the BDS receiver’s Headphone connector.

2. Place the microphone at ear height in your main listening position.

3. Press the remote control’s Home button. The receiver’s Home Menu screen will

appear on the TV.

1 / 5Exit Option

Type: Settings

Home Menu

Blu-ray Disc

FM Radio

HDMI input

Component input

Playlist

Settings

OPTIONS

HOME

4. Use the Cursor and OK buttons to highlight and select Settings. The General Settings

menu will appear.

Select to adjust general settings

System

Language

Playback

Parental Control

Network

General Settings

5. Use the right Cursor button to select Audio Settings, then use the down Cursor button

to select Speaker Settings. The Speaker Settings screen will appear.

Select to adjust speaker settings

Tone Controls

Audio Output

Speaker Settings

EzSet/EQ

Manual Configuration

2.0

Audio Settings

6. Press the right Cursor button to select EzSet/EQ, then use the cursor buttons to

select the conﬁguration of your speaker system.

The EzSet/EQ automatic setup can calibrate the BDS system and configure the

loudspeakers parameters automatically to get the best sound performance.

Tone Controls

Audio Output

Speaker Settings

EzSet/EQ

Manual Configuration

Off

2.0

2.1

3.1

5.1

Audio Settings

7. Press the OK button, then press it again to select Continue in the EzSet/EQ (Automatic

Setup) box that appears.

The EzSet/EQ automatic setup can calibrate the BDS system and configure the

loudspeakers parameters automatically to get the best sound performance.

Tone Controls

Audio Output

Speaker Settings

EzSet/EQ

Manual Configuration

Off

2.0

2.1

3.1

5.1

Audio Settings

EzSet/EQ(Automatic Setup)

Please plug the microphone into the system and

then place it at ear level at your desired listening

position. If a Subwoofer is connected, set the level

control (on the Sub) to half.

Continue Cancel

8. Remain silent while the test noise plays through the speakers. As the test noise

circulates among the speakers the screen will show which speaker is being tested.

The current testing speaker is L

EzSet/EQ(Automatic Setup)

Testing...

Please keep room silent.

SUB

LS RS

Audio Settings

9. When the testing process is completed, the “Testing...” message on the screen will

change to “All test done!”

10. Press the Clear/Exit button to exit the EzSet/EQ test procedure.

NOTE: If the test fails, the “Testing...” message on the screen will change to “Test failed,

please make sure the speaker is connected correctly and room is silent, then retest.”

Press the Clear/Exit button, make sure all speakers are correctly connected and perform

the test again from Step 6. Make sure that the room remains silent during the test.

BDS 270/BDS 570

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 776 - SET Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 776 - SET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info