Bedienungsanleitung Harman Kardon BDS 785S (Seite 12 von 33) (Englisch)

642274

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

BDS 280S/580S

Connections

Connecting the AC Power

The BDS system comes with a detachable AC power cord. This type of cord makes it

easier for you to install and connect all other system wiring to the system’s rear panel.

NOTE:

• The power requirement for the BDS system is 100V – 240V AC,

50/60Hz, 120W (BDS 580S system) or 90W (BDS 280S system).

• Before connecting the AC power cord to a wall outlet, conﬁrm that

you have correctly made all of the speaker connections, video con-

nections and audio component connections.

Connect the female end of the system’s detachable power cord to the rear panel AC

Power input. Plug the other end into a working, unswitched AC outlet.

AC Power Cord

Connecting Headphones

Your BDS system’s headphone connection accepts a standard 1/8-inch (3.5mm) stereo

headphone plug. When you insert the headphone plug into the connector, the system’s

speaker outputs will mute; the HDMI audio output to the TV will not mute.

When headphones are connected to the system’s Headphone jack, pressing the remote’s

Surround button cycles between these two modes:

• Harman Headphone, which virtualizes a multichannel surround soundtrack

down to two channels. This mode retains the soundtrack’s original

directional cues, allowing you to enjoy an enveloping surround-sound

experience on any ordinary pair of stereo headphones.

• Headphone Bypass, which down mixes surround-sound programs into

normal stereo. This mode does not retain any multichannel directional cues

that may be in the original surround-sound program.

Connecting to Network through Wi-Fi

You can connect the unit to the internet through Wi-Fi.

The following instructions help you to connect your unit to the network.

• From the home screen, select Settings > Network.

• Make sure Network Connection is set to ON.

• Set Type to Wi-Fi.

• Select your preferred method of connecting to your wireless network under

Setup Wi-Fi.

There are ﬁve options for setting up wireless networks:

• Choose a wireless network

• Conﬁgure Wi-Fi by iOS

• WPS PBC (Push Button Control)

• WPS PIN

• Custom Setup

Choosing a Wireless Network

To choose a wireless network:

1. Select Choose a network from the Setup Wi-Fi list.

2. Follow the instructions on the screen to select your wireless home

network and enter your security password, if applicable.

Conﬁguring Wi-Fi by iOS

Connect any iOS device (iPhone, iPod touch or iPad) to the front panel USB port of the

BDS. Make sure Wi-Fi is enabled on your iOS device and that it is currently connected to

your wireless home network.

NOTE: iOS version 5 or higher is required for iOS Wi-Fi sharing.

1. Select Conﬁgure Wi-Fi by iOS from the Setup Wi-Fi list.

A pop-up will be displayed on your iOS device.

2. Select Allow to conﬁrm that you want to share your Wi-Fi settings.

3. The connection should now be established automatically.

Check the status on your TV for conﬁrmation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 785S Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 785S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info