Bedienungsanleitung Harman Kardon BDT 3 (Seite 13 von 21) (Englisch)

546080

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENGLISH

Display Settings

Select to adjust display settings

Video Processing

Aspect Ratio

Resolution

Color Space

Film Mode

HDMI Deep Color

16:9 Full

Auto

RGB

Off

Display Settings

TV: This option allows you to set the following display parameters:

• Aspect Ratio: This option lets you select how you want 4:3 programs displayed

on a 16:9 TV, or 16:9 programs displayed on a 4:3 TV. “16:9 Full” stretches 4:3

material to ﬁll a 16:9 TV screen. “16:9 Normal” displays 4:3 programming on a

16:9 TV with black boxes on either side of the image, preserving its original visual

composition without distortion. “4:3 Pan & Scan” zooms in on widescreen material

to ﬁll a 4:3 screen. “4:3 Letterbox” displays 16:9 programming with black bars

above and below the photo, preserving the program’s original visual composition

without distortion.

• Resolution: This option lets you select the video-output resolution of the BDT 3/

BDT 30. The “Auto” setting will automatically select the best resolution for your TV.

• Color Space: This option lets you select a predeﬁned color space for the video

photo.

• Film Mode: If your TV can handle a 1080p 24Hz signal (that is, if it has 1080p

resolution and a video-refresh rate that is a whole-number multiple of 24), set this

option to “On” to get maximum resolution from Blu-ray Disc content mastered at

24 frames per second. If your display cannot handle a 1080p/24Hz signal, set this

option to “Off,” and the BDT 3/BDT 30 will upconvert 24-frame-per-second ﬁlm

material to the standard video 30Hz refresh rate.

• HDMI Deep Color: This option allows you to adjust the resolution of color output

to your TV. If your TV accepts Deep Color, this option allows your TV to display an

enhanced color palette.

• On: The BDT 3/BDT 30 always outputs 36-bit or 30-bit Deep Color.

• Off: The BDT 3/BDT 30 does not output Deep Color (color resolution

remains at 24 bits).

• TV Standard: This option lets you set the standard of your TV display.

• Auto: The BDT 3/BDT 30 automatically sets the standard for your TV.

• PAL: Sets the video display to the PAL standard.

• NTSC: Sets the video display to the NTSC standard.

• HDMI 3D: This option determines how the player handles 3-D programs when

connected to a 3-D-capable TV via the HDMI connection.

• Auto: The BDT 3/BDT 30 automatically displays video in 3-D when the

program is in 3-D format.

• Off: The BDT 3/BDT 30 does not display the video in 3-D.

Video Processing: This option allows you to set the BDT 3/BDT 30’s internal video

processing.

• Video Mode: This option lets you select a preset video-processing option to

optimize the picture for the current program by adjusting the brightness, contrast,

color and sharpness.

• Standard: Neutral control settings

• Vivid: For video games

• Cinema: For movies and many television broadcasts

• Custom: This option lets you adjust the video settings manually. The

Brightness, Saturation (color saturation), Hue and Contrast settings appear

as sliders. The default setting for each adjustment is 0. Use the Cursor Left/

Right buttons to change each setting’s value.

Audio Settings

Select to adjust Audio output settings

Audio Out HDMI Audio Out

Coaxial Output

PCM Downsampling

Dynamic Range Ctrl

Auto

PCM

Off

Audio Settings

Audio Output: This option lets you set the following items:

• HDMI Audio Out: In addition to digital video signals, the BDT 3/BDT 30’s HDMI

connection also carries digital audio signals. Four settings are available:

• Auto: This option causes the BDT player’s HDMI Output connector to output

the digital audio format that best matches the surround-sound decoding

capabilities of the component to which it’s connected.

• Bitstream Native: This option outputs the program in its native audio format

via the HDMI Output connector.

• PCM: This option outputs a two-channel downmix derived from the

program’s native audio format via the HDMI Output connector.

• Off: This option turns the BDT player’s HDMI audio output off. If you are

using the player’s HDMI connection for video only (you have connected

the player’s HDMI output directly to your TV and have connected the

BDT 3/BDT 30 Coaxial Digital Output connector to a home theater audio

system), we recommend that you set the HDMI Audio Out to “Off.”

• Coaxial Output: If you are using the BDT player’s HDMI connection for video only

and have connected its Coaxial Digital Output connector to your home theater

audio system, select one of these three options:

• Bitstream Native: This option outputs the program’s native digital audio

soundtrack via the Coaxial Digital Output connector.

• PCM: This option outputs a two-channel downmix of the original

digital soundtrack via the Coaxial Digital Output connector. (See PCM

Downsampling, below.)

• Transcode: This option transcodes a program’s lossless format (Dolby

TrueHD or DTS-HD Master Audio) program to a lossy format and outputs it

via the Coaxial Digital Output connector.

• PCM Downsampling: This option sets the sampling rate of PCM two-channel

downmixed signal. Set this option to the highest sampling rate that the connected

component can handle. NOTE: If the component can handle a 192kHz sampling

rate, set this option to “Off,” which will pass 192kHz sampled material without

downsampling.

BDT 3/BDT 30

Setting Up the Player

Harman Kardon BDT 3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDT 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info