Bedienungsanleitung Harman Kardon BT - On-Ear Headphones (Seite 4 von 22) (Alle Sprachen)

810264

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

NOTE: If the headphones with the factory-installed metal bow do not t comfortably on your

head, you can install the supplied larger metal bow to achieve a more comfortable t. Refer to

the accompanying sheet for instructions on changing the bow.

CHARGING YOUR HEADPHONES

1. Connect the supplied charging cable to the charging connector and to another device’s

standard USB port. The charging LED will illuminate red. Note: You cannot use the head-

phones while they are charging.

2. Charging time is approximately 2 hours. (Charging from mobile devices such as laptop

computers may take longer.) When the headphones are fully charged the charging LED will

turn off.

During normal operation, when the battery is low the BT LED will ash red slowly.

TURNING YOUR HEADPHONES ON AND OFF

Press the BT button for approximately two seconds to turn the headphones on and off. The BT

LED illuminates blue for two seconds to indicate that the headphones are on, then turns off.

The BT LED illuminates red for approximately two seconds to indicate that the headphones are

off, then turns off.

PAIRING YOUR HEADPHONES WITH A BLUETOOTH-CAPABLE DEVICE

1. Turn the headphones off.

2. Press and hold the BT button for six seconds. The BT LED will ash blue rapidly.

3. Perform a new device search on your Bluetooth-capable device.

4. Select “harman BT.” If your device requests a passcode, use 0000.

5. When the headphones are paired with the device, the BT LED will ash blue twice and turn

off for ve seconds; it will continue in this pattern while the headphones are paired and in

standby.

If your harman/kardon BT headphones were paired with your device the last time you used

them, it is likely all you will have to do to re-establish the connection is turn your the head-

phones on.

• The Bluetooth operating range (depending on your device) is approximately 26 feet (8m).

OPERATION: MUSIC

Depending on your Bluetooth-capable device’s software version, some of the functions men-

tioned in this owner’s manual may not be supported.

Play/Pause: Press the

•

button

Skip ahead to the next track: Press the

•

button quickly two times

Skip ahead to the last track: Press the

•

button quickly three times

Raise and lower the volume: Press the + and – buttons

If the harman/kardon BT headphones battery is empty or you do not need Bluetooth functional-

ity you can use the supplied bypass cable to connect the headphones to a device that has a

standard 3.5mm stereo headphone connector. (Turn the headphones off before connecting

the cable.)

Note: The headphone controls do not function in this mode. Use the controls on the device.

OPERATION: PHONE

To place or end a call: Press the

•

button

To reject an incoming call: Press and hold the

•

button

Raise and lower the volume: Press the + and – buttons

During a call, pressing the

•

button will transfer the call between the HK BT headphones and

the transmitting phone.

RESETTING THE CONNECTIONS

1. Turn the headphones off.

2. Press and hold the BT button and the – button simultaneously for more than eight seconds.

LED INDICATIONS

■

= blue

■

= red

= off

BT LED ACTIVITY STATE

■■■■■

Power On

■■■■■

Power off

■ ■ ■ ■ ■ ■ ■ ■

Bluetooth pairing mode/incoming call/

outgoing call

■ ■ ■ ■ ■ ■ ■ ■

Standby (paired with Bluetooth device)/

Active call

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Standby/AAC mode play – pause

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Standby/apt-X mode play – pause

■ ■ ■ ■ ■ ■ ■ ■

Standby (not paired with Bluetooth device)

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Low battery

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Connections reset

CHARGING LED ACTIVITY INDICATION

●

Charging

●

Charged

SPECIFICATIONS

Frequency range: 2.4GHz – 2.4835GHz

Transmitter power: <3.0mW

Modulation: GFSK/ π /4-DQPSK/8-DPSK

Charger voltage: 5V

Nominal voltage: 3.7V DC

Operating temperature: +41°F – +95°F (+5°C – +35°C)

Supports Bluetooth 2.1+EDR, A2DP v1.2, AVRCP v1.0, HSP v1.2 and HFP v1.5.

Supports AAC, aptX, cVc.

WARNING

• Do not expose the headphones to excessively high temperatures (i.e. do not use in strong

direct sunlight or in a hot vehicle).

• Do not expose the headphones to dripping or splashing liquids.

• Do not place objects lled with liquids, such as vases, on the headphones.

• Do not place a naked ame source, such as a lighted candle, on the headphones.

• Do not block ventilation openings with items such as newspapers, tablecloths, curtains, etc.

• Do not expose the battery to excessive heat, such as from direct sunlight, re, or similar.

• Follow local environmental regulations regarding battery disposal.

• Listening to headphones at excessive sound pressure levels can cause hearing loss.

• If you suspect any kind of battery defect (such as leakage, smell or overheating when not in

use) or any other damage, stop using the headphones.

• Do not open the headphones under any circumstances.

• These headphones contain small parts that are hazardous if ingested of inhaled: keep away

from small children when they are unattended.

• Only use this device with the cables supplied.

Harman Kardon BT - On-Ear Headphones Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info