Bedienungsanleitung Harman Kardon CDR 30 (Seite 9 von 26) (Englisch)

502658

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

REAR PANEL CONNECTIONS 9

Rear Panel Connections

Play (CDP)-Deck Analog Output: These

jacks carry the analog audio output signal from

the Play Deck

during normal play, in Single

mode also from the Record Deck

, and dur-

ing CD Dubbing. Connect them to the CD input

jacks on a receiver, preamp or processor.

™

Record (CDR)-Deck Analog Output:

These jacks carry the output signal from the

Record Deck

during normal play, in Single

mode also from the Play Deck

, and during

analog or digital recording. Connect them to the

Tape Play/In input jacks on a receiver, preamp or

processor.

Record (CDR)-Deck Analog Input: These

jacks accept the analog signals that are used

for CD recordings. Connect them to the Tape

Rec/Out outputs on a receiver, preamp or pro-

cessor or directly to any analog source to be

recorded.

Play (CDP)-Deck Coaxial-Digital

Output: This jack carries the digital-audio out-

put signal from the Play Deck

during nor-

mal play, in Single mode also from the Record

Deck

, and during CD Dubbing. Connect it to

a coaxial-digital input on a receiver, processor or

digital decoder.

∞

Record (CDR)-Deck Coaxial-Digital

Output: This jack carries the digital audio out-

put signal from the Record Deck

during

normal play, in Single mode also from the Play

Deck

and during analog or digital recording.

Connect it to a coaxial digital input on a receiv-

er, processor or digital decoder.

Record (CDR)-Deck Coaxial-Digital

Input: This jack accepts the digital-audio input

signal from a compatible digital audio product

and should be connected to the coaxial-digital

output on a CD, MD or DVD player or an A/V

receiver or processor.

IMPORTANT NOTE: The coaxial digital outputs

and inputs should only be connected to digital

input or output jacks. Even though they use the

same RCA type connector as standard analog

audio connections, DO NOT connect them to

conventional analog input or output jacks.

Record (CDR)-Deck Optical-Digital

Input: This jack accepts the digital-audio input

signal from a compatible digital audio product,

and should be connected directly to the optical-

digital output on a CD, MD or DVD player or an

A/V receiver or processor.

•

Record (CDR)-Deck Optical-Digital

Output: This jack carries the digital audio out-

put signal from the Record Deck

during

normal play, in Single mode also from the Play

Deck

, and during analog or digital record-

ing. Connect it to an optical-digital input on a

receiver, processor or digital decoder.

Play (CDP)-Deck Optical-Digital

Output: This jack carries the digital audio out-

put signal from the Play Deck

during nor-

mal play, in Single mode also from the Record

Deck

, and during CD Dubbing. Connect it to

an optical-digital input on a receiver, processor

or digital decoder.

‚

Remote IR Input: Connect the output of a

remote infrared sensor or the remote control

output of another compatible Harman Kardon

product to this jack. This will enable the remote

control to operate even when the front-panel

Remote Sensor

is blocked.This jack may

also be used with compatible IR remote control

based automation systems.

⁄

Remote IR Output: Connect this jack to

the IR input jack of another compatible Harman

Kardon remote controlled product to have the

built-in Remote Sensor

on the CDR 30

provide IR signals to other compatible products.

AC Power Cord: Connect this plug to an

AC outlet. If the outlet is switch controlled, make

certain that it is in the ON position, if you want

to turn the unit on.

™

∞

•

‚

⁄

100-240V~, 50/60Hz 28W

™

∞

•

‚

⁄

Play (CDP) Deck Analog Output

Record (CDR) Deck Analog Output

Record (CDR) Deck Analog Input

Play (CDP) Deck Coaxial-Digital Output

Record (CDR) Deck Coaxial-Digital Output

Record (CDR) Deck Coaxial-Digital Input

Record (CDR) Deck Optical-Digital Input

Record (CDR) Deck Optical-Digital Output

Play (CDP) Deck Optical-Digital Output

Remote IR Input

Remote IR Output

AC Power Cord

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon CDR 30 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info