Bedienungsanleitung Harman Kardon DVD22 (Seite 17 von 24) (Englisch)

65480

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

SYSTEM SETUP 17

System Setup

System Defaults

The final step of the installation is to establish

the system’s defaults. It is helpful to take a few

minutes to familiarize yourself with these

settings, as they may require change before the

first use and later from time to time.

General Functionality of the OSD Menu

The complete setup and control of the DVD 22

takes place in an advanced user-guided On

Screen Display (OSD) menu system. The OSD can

be activated by pressing the OSD button on the

remote control. Pressing this button again de-

activates the OSD.

The main menu consists of a PLAYER Menu and a

SET-UP Menu. The PLAYER Menu will show all

information and options available for the disc

currently playing. The SET-UP Menu will help you

configure all audio and video settings which are

normally only made once.

Each Main Menu contains Submenus. These sub-

menus are shown as icons on the left side of the

menu. They can be highlighted by a white square

around the icon by moving the cursor with the

ARROW buttons. Icons can be activated by press-

ing ENTER as soon as an icon is highlighted.

When ENTER has been pressed, the color of the

icon will change to dark blue and you will see

that the Actual Settings of this submenu will

appear on the right side of the menu.

Although each Menu has various Submenus and

Settings, navigating through menus, submenus

and settings goes the same way. All submenus,

settings and options can be accessed with the

help of the ARROW (

KLN M

) and ENTER

buttons on the remote control.

To change a setting, simply move the cursor to

the setting you wish to change. This setting will

be highlighted in light blue, and a brief explana-

tion will appear in the Upper Menu Line on the

bottom of your screen. Once the setting is high-

lighted, pressing the ENTER button on the remote

control will show the available options for this

setting on the Lower Menu Line on the bottom of

your screen. Move the ARROW

buttons

to the requested option for this setting. Press

ENTER to activate the new setting.

Set Up Menu

The first step in checking or changing the system

defaults is to access the Setup Menu. First, make

certain that the DVD is properly connected to a

video display, and that power is connected. For

this process, however, you do not need to load

any discs into the unit.

During STOP, PAUSE or PLAY mode, if you press

OSD on the remote, the Set Up Menu appears on

the screen.

This Main Menu and all menus in the following

section may look different, listing the settings

with different languages, depending on the set-

tings made previously. With the factory default

setting all languages are set to ”English”, that´s

why with all menus the English version is shown

in the manual.

In the SET-UP Menu you will find submenus for

making or changing all settings and adjustments

for both Audio and Video handling of your DVD

22.

To access the SET-UP Menu, press the OSD but-

ton, and move the cursor to the right until SET-UP

is highlighted. Press ENTER to activate the SYS-

TEM Settings:

System Settings

(A) Main Menu Line

(B) Submenus

(D) Upper Menu Line with Brief Explanation

(E) Lower Menu Line with Possible Options

The System Setting Submenu contains the

following settings. Follow the explanations in the

Upper Menu Line on the bottom of your screen to

change the settings.

Display Language: Sets the language in which

the OSD menus are shown on your screen.

Preferred Subtitle Language: Defines your

preferred subtitle language. Every time a disc will

be played that contains this subtitle language, it

will be shown automatically. If you do not find

your preferred language in the list of options, you

can select your preferred language by typing a

4-digit code found in the code list on page 20.

You can also set the preferred subtitle language

to OFF. In that case no subtitles will be shown.

Panel Time-Out: Sets the time-out interval for

the Front Panel Information Display. After the

selected time, the display will dim completely.

Status Bar Time-Out: Sets the time-out interval

for the Status Bar, after which the Status Bar will

disappear from the screen.

Parental Control: Defines a password used to

control viewing of restricted programs. The

default password is 8888. After pressing the

default password, either the parental control

setting can be chosen, or a new password.The

five standard US rating symbols are ”G”

(General, level 2), ”PG” (Parental Guidance, level

4), ”PG13” (Parental Guidance and 13 years old,

level 4), ”R” (Restricted, level 6) and ”NC 17”

(from 17 years old, level 7).The DVD will accom-

modate a total of eight rating steps, as set by the

DVD creators. These additional steps allow for

more critical control of program playback for all

audiences. Level 8: All DVDs can be played. Levels

7 to 2: DVDs for general audiences/ children can

be played. Level 1: DVDs for children can be

played; DVDs for adults/general audiences are

prohibited. Follow the explanations on the screen

to set a new password.

PBC Support: Activates PBC (Play Back Control)

Support for VCD discs.

Screen Save: Activates a Screen Saver to

prevent an image to “burn” into a video display

device. If you connect the DVD 22 to a LCD or

plasma screen or video projector, we recommend

you activate the screen saver at all times.

Show Angle Icon: Determines whether the

Angle Icon will appear on the screen when there

are different angles available on a DVD disc.

(A) (C)

(B) (E) (D)

20825_DVD22 Eng_new 17/08/04 12:24 Side 17

Harman Kardon DVD22 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info