Bedienungsanleitung Harman Kardon FL8380 (Seite 8 von 16) (Englisch)

502826

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

8 REMOTE CONTROL FUNCTIONS

Remote Control Functions

Disc-Select: Press one of these buttons to

select the disc in a specific position in the CD

drawer.

Numeric Buttons: Press these buttons to

select a specific track on a disc.The FL 8380 will

immediately go to the track and begin to play it.

These buttons are also used to enter track num-

bers into the memory for preprogrammed-play

lists. (See page 13 for complete information on

programming the FL 8380.)

Clear: Press this button to remove tracks

from a programmed sequence. Each press of the

button will remove one track, starting with the

last track programmed to play. (See page 13 for

complete information on programming the

FL 8380.)

Search: Press these buttons to search for-

ward

—

or backwards

‚

through a disc to

locate a particular portion of the selection being

played.

Skip: Press one of these buttons to move to

the next track

ﬂ·

or to move back to the previ-

ous track

‡ﬁ

on the disc being played.

Stop: Press this button to stop the disc cur-

rently being played.

Play: Press this button to start the play-

back of a CD. If the CD drawer is open, pressing

this button will automatically close the drawer.

Random: Press this button to play all

tracks on one or more CD’s in random order.

(See page 11 for more information.)

Pause: Press this button once to momen-

tarily pause a disc. When the button is pressed

again, the disc will resume play from the point

at which it was paused.

Program: This button is used to program

the playback of discs and tracks in a particular

order. (See page 13 for complete instructions on

programming the FL 8380.)

Time: In normal operation, the display will

show the running time of the track being played.

Press the button once to check the time remain-

ing for the track in play. Press the button again

to view the total play time remaining for the disc

in play.

Intro: Press this button to put the FL 8380

into the Intro Scan mode. When you press this

button, the unit will play the first 10 seconds of

each track on the disc, and then move to the

next track. Press the button again to defeat the

function and continue full play of the current

track. (See page 12 for more information.)

Repeat: Press this button once to continu-

ously repeat the track currently being played.

Press it a second time to repeat the entire disc

and a third time to repeat all discs. (See page 13

for more information).

Disc-Skip: Press these buttons to change

to the next or former disc. If a disc position is

empty, the FL 8380 will automatically search for

the next position that contains a disc unless the

disc drawer is open.

Power On Button: When the FL 8380 is

plugged into an active AC outlet, press this button

to turn the unit on.The Status Mode Indicator

will turn green. If the unit is plugged into a

switched outlet, power must be applied to the

switched outlet in order for the Power On button

to be effective.

Power Off Button: Press this button to

turn the unit off; the Status Mode Indicator

will turn amber, indicating that the unit is in a

Standby mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon FL8380 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info