502826

Harman Kardon FL8380 Seite 13

13
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
PROGRAMMED-PLAY OPERATION 13
Programmed-Play Operation
The FL 8380’s advanced programming capability
enables you to preset specific tracks of any CD
and the order in which tracks play, repeat specific
discs or tracks or repeat all discs and tracks.
Programmed Play
Programmed play allows you to program up to
32 tracks (from one or more CD’s) or complete-
disc play-through into the FL 8380’s memory. To
begin programming the FL 8380, press the
Program button
9
on the remote control.
The PROGRAM indicator will light in the
Information Display
C
.
You may now begin to enter the discs and tracks
in the order in which you wish to have them
play. Once the PROGRAM indicator is lit,
P-01 will appear in the Information Display,
replacing the track time. This indicates that you
are about to program the first track.
Press the Disc-Select button
B
0
to choose
the first disc to be programmed (unless you
choose the current disc), and note that AL will
flash in the Information Display. To have all
tracks on the disc play in order as the first pro-
gram step, press the Program button
9
again. To select a single track on the disc, press
the Numeric buttons
1
corresponding to the
desired track (see page 10 how track numbers
must be entered). You may also use the Skip
buttons
7
4
to select a track.When the disc
and track are selected, press the Program but-
ton
9
. Note that the program-step indication
on the right side of the Information Display will
change to P-02.
You may now select another disc and/or track
for the next program step, following the instruc-
tion shown above. When the program step is
selected, press the Program button
9
.
Repeat this procedure for each program step
until you have completed the desired program-
ming. Press the Stop button
8
5
once to
complete a program sequence, or press Play
6
(Play/Pause
9
on the front panel) to
begin immediate play of a program sequence. If
the maximum of 32 program steps is reached,
the program-step indication at the right side of
the Information Display will go out, and the disc
and track that have been programmed as the
first program step will be shown.
Once a program list has been entered, press the
Play button
6
(Play/Pause
9
on the front
panel) to begin listening to the sequence. After
the entire program has been played, the FL 8380
will stop. As long as the Stop button
8
5
has not been pressed twice and the PROGRAM
indicator remains lit, you may repeat the pro-
grammed-play sequence again by pressing the
Play button
6
(Play/Pause
9
on the front
panel).
Pressing Stop button
8
5
twice will return
to normal mode and the PROGRAM indicator will
delete, but the program will stay in memory and
can be recalled easily by pressing the Program
9
button. But pressing the Clear button
2
(see below), opening the disc drawer by pressing
Open/Close
5
, or turning the FL 8380 off will
erase the program information from the unit’s
memory.
Checking Program Contents
To check the contents of a program while the
unit is stopped at first note that the PROGRAM
indicator is lit (otherwise press Program
9
)
and the program step indication P-01is
not lit (otherwise press Stop
5
once).
Each time you press the Skip buttons
7
4
the Information Display will step through each of
the programmed discs and tracks.
Clearing Programs
To clear a single track from the program list, press
the Program button
9
on the remote until the
track to be deleted from the program sequence
appears in the Information Display
C
.When the
track number appears, press the Clear
2
on the
remote once, then Stop
5
, the track selected
will be deleted from the title calendar at the
right of the display. Now you can press the
Program
9
to select other items to be deleted.
When the unit is stopped and the program step
indication P-01 is not lit (otherwise press
Stop
5
once), but the PROGRAM indicator is
still lit, you may clear the entire contents of a pro-
gram by pressing the Clear button
2
.
Repeat Play
The FL 8380’s programming system enables you
to repeat all of the tracks on all of the discs, a
complete single disc, or a single track.
Repeat Track Play
To repeat a single track, press the Repeat but-
ton
C
on the remote control while the desired
track is playing so that the REPEAT and 1 indica-
tors are lit. The Repeat Track mode may also be
activated while the unit is stopped by selecting
the desired track using the Disc-Select buttons
B
0
and then the Skip buttons
7
4
or
the Numeric buttons
1
as outlined on page
11. When the track is chosen, press the Repeat
button
C
on the remote control and the Play
button
6
(Play/Pause
9
on the front
panel). The track will play until the Stop button
8
5
is pressed.
Repeat Disc Play
To repeat an entire disc, press the Repeat but-
ton
C
twice so that the REPEAT and DISC indi-
cators are lit. Press the appropriate Disc Select
button
B
0
, the desired disc’s icon lights and
the disc number appears in the Information
Display
C
. The selected disc will play through
to the end and then continue to repeat until the
Stop button
8
5
is pressed.
Repeat All Discs
To repeat all of the discs that have been loaded
into the FL 8380, press the Repeat button
C
three times so that the REPEAT, ALL and DISC
indicators are lit. Press the Play button
6
,
(Play/Pause
9
on the front panel) and the
unit will play all tracks on all discs, starting with
the disc that has been loaded in the play posi-
tion.When all discs have played through, the
sequence will repeat and the discs will continue
to play until the Stop button
8
5
is pressed.
NOTE: You may cancel a repeat function any
time by pressing the Repeat button
C
until
the REPEAT indicators go out.The player will
continue with normal play.
IMPORTANT Note: Tracks programmed as
described above in chapter ”Programmed Play”
can be repeated too: When you press Repeat
C
once after a program is created (the PRO-
GRAM indicator must be lit, (otherwise press
Program
9
) and the program step indication
P-01 is not lit (otherwise press Stop
5
once), the REPEAT 1 indicator will light and the
track currently selected or playing will be repeat-
ed continuously. If Repeat is pressed twice
REPEAT ALL will be displayed, all programmed
tracks on all discs will be played subsequently
and the sequence will be repeated continuously
until Stop
5
is pressed.
… 13 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon FL8380 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info