Bedienungsanleitung Harman Kardon HD 3700 (Seite 11 von 17) (Englisch)

599843

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

ENGLISH

OPERATION

Operation

While the disc is playing, the track being played

will show as a number in the middle of the

display. The elapsed time of the track being

played will also appear in the display (see ﬁgure

page 10). As a disc plays, the track numbers will

change, and the time

will be shown at the

start of each new track.

To momentarily pause, press the Pause button

. Note that a Pause indication

will appear

in the display to remind you that the disc is

paused. Press either the Play button

or the

Pause button

to resume normal playback.

To stop the disc, press the Stop button

When the Stop button is pressed the display will

again show the total number of tracks and total

running time of the disc.

To remove a disc from the player, press the

Eject button

. To prevent dirt and dust from

entering the unit, do not leave the disc tray open.

To place the unit in a Standby mode, press the

Power Switch

on the front panel or the

Power Off button

on the remote. The display

will show a STANDBY message for a moment and

the Status Mode Indicator will glow amber,

indicating that the unit is off, but ready to accept

a Power On command from the remote. If the

disc drawer is open, it will automatically close

when the unit is placed in the Standby mode.

This ensures that the unit will not be harmed

from dust, dirt or inadvertent damage to the

drawer mechanism.

Note that the unit is not removed from AC main

power when it is in the Standby mode but its

power consumption is reduced to a low value.

To remove the AC power completely from the

unit its Power cord must be plugged into a

switch controlled AC outlet that is turned off.

We recommend to use the switched AC outlet

on the rear side of a receiver or ampliﬁer. When

that AC outlet will be turned on, the HD3700 will

always turn to the Standby mode even if it was

on before the AC power was removed.

Time Display

The CD player’s time display is capable of

showing a wide range of information about a CD.

In normal operation the display will show the

total running time of a CD after the disc is ﬁrst

put in the unit. When the disc is played, the

display will show the running time of a track

in play. Each time the track changes, the time

display will reset

and begin to increase

again as the new track plays.

To view the time remaining on an individual

track, press the Time button

on the remote

once. The display will now show the track time

remaining, and a ‘-’ will light in front of the time

display as a reminder of the display’s status.

To view the elapsed time of the disc currently

playing, press the Time button

again.

To view the total time remaining on the disc,

press the Time button again. Will display the

remaining total time on the disc with a ‘-’ in the

front, starting from the next track of the formerly

played track.

When the Time button is pressed again, the

display will return to show the elapsed time of

the track in play.

Note: When a program is played (see page 13),

all time modes are selectable except the total

time remaining on the disc.

The time mode is available and pressing this

button switches back to the time viewing mode if

you are in the info viewing mode.

Disc Info

The HD3700 is able to show CD-Text information

from CDs, as well as ID3 tag and other

information from discs containing MP3 data.

Please note that not all CD’s contain CD-Text.

In that case, the Information Display will show

NO CD-TEXT and will return to the time mode

previously selected.

If you play back a CD that contains CD-Text

information the TEXT indicator will light in the

Information Display. During playback, the

artist name, track name, and album name can be

made visible on the Information Display by

pressing the Info button

several consecutive

times. Each press of the Info button

will

show the next line of information. If the text is

longer than 12 characters, the text will scroll

continuously from right to left on the

Information Display.

If you play a disc with MP3 data, the ﬁlename,

the data rate (Constant Bit Rate CBR and

Variable Bit Rate VBR) and folder/root name can

be made visible on the Information Display

by pressing the Info button

several

consecutive times. If ID3 tag information is

included in the MP3 data, the artist name, track

name, and album name can also be made visible.

Each press of the Info button

will show the

next line of information. If the text is longer than

12 characters, the text will scroll continuously

from right to left on the Information Display.

To return to the normal Track/Time indication

press the Time button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon HD 3700 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info