Bedienungsanleitung Harman Kardon HKTS30SAT-2 (Seite 5 von 8) (Englisch)

534549

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

4 5

ENGLISH

Speaker Connections

CAUTION: Before making speaker connections, be sure that your receiver or

amplifier is turned OFF and preferably, its AC cord is unplugged from the AC power

outlet.

Color-Coding System

The HKTS30SAT-2 use the channel color-coding system established by the CEA to make

setting up your home theater speaker system as easy as possible. The HKTS30SAT-2

systems include speaker wires with color bands on each end.

Speaker Position Wire Color Band

Surround Back Left Brown

Surround Back Right Tan

Speakers and receivers/amplifiers have corresponding ( + ) and ( – ) connection

terminals. Most electronics manufacturers, including Harman Kardon, use red to denote

the ( + ) terminal and black for the ( – ) terminal. Newer Harman Kardon receivers

conform to the CEA standard and therefore use a color other than red to denote the ( + )

terminal for some speaker positions.

Each speaker wire included with your system has colored bands at both ends of the ( + )

conductor. In addition to the colored bands at each end, each speaker wire’s ( + ) terminal

has ribs molded into its insulation to help identify it, while the ( – ) terminal has no ribs.

It is very important to connect each speaker identically: ( + ) on the speaker to

( + ) on the receiver or amplifier, and ( – ) on the speaker to ( – ) on the receiver or

amplifier. Miswiring one or more speakers results in thin sound, weak bass and a poor

stereo image. With the advent of multichannel surround-sound systems, connecting

all of the speakers in your system correctly is very impor-tant for achieving the proper

ambience and directionality of the sound coming from the speakers.

To connect the speaker wire to the terminals on the speakers, press down on the top of

the terminal to open the connection hole, insert the wire’s bare end all the way into the

hole and release the terminal to secure the wire. Insert the conductor with the colored

band into the speaker’s red ( + ) terminal, and insert the other conductor into the

speaker’s black ( – ) terminal, as shown in the illustration.

–

Push Down on Cap to

Open Hole

Insert Bare Wire into

Open Hole

Release Cap to Secure Wire

IMPORTANT: Make sure the ( + ) and ( – ) bare wires do not touch each other or

the other terminal. Touching wires can cause a short circuit that can damage your

receiver or amplifier.

Connecting HKTS30SAT-2 Speakers with

Supplied Wall-Mount Brackets

Follow the instructions in Wall-Mounting, on page 3.

Connecting HKTS30SAT-2 Speakers with

Supplied Bases

Remove the speaker’s base (see1. Shelf Placement, on page 3).

Pass the speaker wire through the opening in the speaker 2.

base.

Connect the speaker wire as described in Color-Coding 3.

System, opposite.

Reattach the speaker’s base as shown in the illustration.4.

0209CSK - HK HKTS30SAT-2 Inlay.indb 5 09/04/10 8:56:05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon HKTS30SAT-2 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon HKTS30SAT-2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info